Sony CLIE PEG-SJ20 Handheld - Answered Questions & Fixed issues
Is it technically possible to recover the data
NO, not usually, but in saying that I guess residual charge may for a brief period allow it to work until all the power was dissipated. from the capacitors etc, BUT that's highly unlikely. So the answer is YES, it is technically possible. It also depends on the definition of "Dies" a dead battery while it may NOT power the unit, may have enough to work certain parts of the circuit. BUT if the battery is totally exhausted. and there is NO power at all. Then NO.
3/13/2010 7:19:17 AM •
Sony CLIE...
•
Answered
on Mar 13, 2010
•
88 views
Memory Stick Issues
It clearly states on Sony web site that only 32Mb PSP memory Pro will work with SJ20
8/26/2009 4:50:02 AM •
Sony CLIE...
•
Answered
on Aug 26, 2009
•
96 views
My sony CLIE PEG-SJ20 is
I had the same problem with my clie peg-sj20 on my vista home basic based laptop. I could not hotsync after installing the original software. I've never tried to use my pda with this setup before so I was trying to find a way to make it work when I found this post, figured I would reply with what I found.
My Sony clie peg-sj20 runs the Palm o.s. 4.1 software and apparently Sony no longer supports this model. So after trying to hotsync and letting the Windows vista install wizard find the proper software, it suggested contacting the manufacturer of the operating system. I went to the Palm websight and downloaded the Palm o.s. 6.2 software which is compatible with vista, even though it doesn't say it supports the sj20. After installing it I performed a hotsync during setup when I was prompted to do so, and it totally worked. I'm not sure if this version works with other applications but it enabled me to hotsync running vista.
Hope this helps someone out there. Good luck.
8/16/2009 10:33:18 PM •
Sony CLIE...
•
Answered
on Aug 16, 2009
•
586 views
SONY CX330 camera shutting down
Why do they need to be turned on all the time? If your using them as security cameras they are not designed for that job. The 330 could be overheating because of the constant use. Some cameras have a built in 'Overheat' switch which could be switching it off.
These cameras are designed for short periods of use, recording things like parties and holiday trips. How old are these handycams? These do get old and the technology in them can wear out if in constant use.
Sony cfd-s70 Will Not Read CDs
There are a few possible causes for a Sony CFD-S70 CD player not reading CDs. Some possible issues include:
- Dirty or damaged CD: Make sure the CD is clean and free of scratches or damage.
- Dirty lens: The lens that reads the CD may be dirty or dusty. A cleaning disc can be used to clean the lens, or you can use a soft, dry cloth to gently wipe it clean.
- Faulty lens: If the lens is faulty, it may need to be replaced.
- Faulty CD mechanism: If the CD mechanism is not working properly, it may need to be repaired or replaced.
- Power Supply Problem: Make sure the power supply is connected and the power outlet is working.
- Firmware issue: A firmware issue could prevent the CD player from reading CDs. You should check the Sony website to see if there are any firmware updates available for your specific model.
If the problem persists after trying these suggestions, it is recommended to take the device to a professional repair service or the nearest Sony Service center.
Sony TRV 740 E Fehlercode C:31:40
Der Fehlercode C:31:40 bei Sony Camcordern deutet auf ein Problem mit dem Motor des Kassettenfachs hin. Es kann sein, dass der Motor blockiert ist oder dass es ein Problem mit den Sensoren gibt, die den Status des Kassettenfachs ?berwachen. Um das Problem zu beheben, k?nnen Sie folgende Schritte ausprobieren:
- Entfernen Sie die Batterie und das Netzkabel des Camcorders und lassen Sie das Ger?t f?r einige Minuten ausgeschaltet.
- ?berpr?fen Sie das Kassettenfach auf lose Teile oder Fremdk?rper, die m?glicherweise blockieren k?nnten.
- Versuchen Sie, das Kassettenfach vorsichtig zu schlie?en und zu ?ffnen, um zu sehen, ob dies das Problem l?st.
- Wenn das Problem weiterhin besteht, k?nnen Sie versuchen, das Kassettenfach mit Druckluft zu reinigen, um m?gliche Blockaden zu entfernen.
- Wenn alle diese Schritte fehlschlagen, kann es ein mechanisches oder elektronisches Problem sein, das eine Reparatur durch einen qualifizierten Techniker erfordert.
Es ist auch m?glich, dass das Problem durch eine defekte Cassette verursacht wird. Wenn m?glich, versuchen Sie, eine andere Cassette auszuprobieren, um zu sehen, ob dies das Problem l?st. Wenn das Problem weiterhin besteht, liegt es h?chstwahrscheinlich am Camcorder selbst.
Not finding what you are looking for?