20 Most Recent
Neff W4380X1 Front Load Washer Questions & Answers
I have a NEFF W4380
This is a problem if you cannot get hold of the wire through a hole in the inside drum then there is only one way. open the outer tank. This can be difficuilt as most machines will not allow this unless the complete outer tank is removed after the top lid is removed. The outer tank has to be lifted out of the case as it hangs on springs with drive motor. Big job not sure if you up to it. maybe check u tube how to remove outer tank from casing of front load WM
Neff washing machine stops half way through the cycle and the high water level light comes on
possible hose blockage or filter blockage. when half way through the cycle the machine evacuates the water to replace for rince cycle or to start spin cycle if the way is blocked the water cant go out so the machine can not finish the cycle, and usually the door will stay locked so not to flood, when the water is still in the machine. remove and check the drainage hose for kinks and blockage. also remove and check the filter under the machine. (be careful as this will let out all the water so have some towels or bucket ready to catch the water. once the filter is clean replace and restart your machine.I hope this was useful.
Not finding what you are looking for?
