20 Most Recent
- Page 7 Questions & Answers
My Maytag 4000 front loader drain motor will not turn propeller
Don't try to fix it yourself it could cost you more in the long run but if the shaft isn't turning the propeller more than likely there is something in the pump stopping it like a small sock for example call a repair tech worse case is u need a new pump
How difficult is it to replace the water dispenser valve on maytag mah6500aww washing machine?
It is not that hard of a job, You have picked a topic that is rare for this machine though. Fill issues are not common. Anyway you need to unplug it and turn off the water supply and disconnect the hoses, Check for hinges on the back of the unit that connect the lid to the back. The top section usually lifts from the front edge and you may need some plastic wedge to avoid paint damage while separating. When you lift it, you will see the valve assembly and you just remove the hoses that are clamped to them and then remove the wire connections and then the mounting screws. You put the new in and install it in reverse. Take pics with a digital or camera phone if you think it is going to be confusing. That way you can get itt back the way it was.
Maytag lse7806ace drum not turning
The drum turns on a belt. If you can see behind you can see if the belt is broken or just off of the motor. If the belt is in place you may have a bad motor.
Not finding what you are looking for?