Neff U1461 Double circotherm plus Electric Oven - Answered Questions & Fixed issues

circotherm element failed will need replacement.

clock needs to be set if ok then element failed.

I would have gone straight through Neff. If it can't be fixed, your'e supposed to get a new oven out of the deal.

Pair of pliers on the old knob (make sure it is in the off position) and a hefty tug. The new one will push on by hand, push it all the way in so it is flush to the fascia and then click it to check the pop out mechanism works ok. The knob is a D shaped fitting with the flat part of the D at the top.Hope this helps. You may find when you tug at the old knob, the cover comes off and you are left with the black portion still in position, if this happens, reposition the pliers on the protruding black lug and give it another pull, this will get out the remaining part of the knob.

You need to replace the fan oven element located at the rear of the oven compartment behind a removeable cover.

There may be a problem with the cooling or extraction fan on the oven. All Neff appliances come with a two year manufacturers warranty, so I would advise you call them out on 0844 892 8999. If you attempt a repair yourself, you could invalidate the warranty.
All the best.

check oven fan is starting and maintaing a steady speed these seize up with carbon very soon after useage.

I would suggest that the oven element is faulty
This is located at the rear of the innner oven compartment behind a removeable cover.

If the door is a drop down door, then no adjustment is possible, the only solution is to replace both door hinges.
Please rate my solution.
Thanks.

Hi.
You need to fit a new oven element, as this is the reason you are getting no heat.
Please rate my solution.
Thanks.

Try heating it up with a hair dryer or similar if that does not work then you will probably have to break the glass cover.

your convection element has blown by one online and replace it yourself

Go to the Neff site and dowload a manual

manualsparadise.com or repairmanual.com
Try these two.

See troubleshooting section for help User manuals, spare parts and accessories C57W40S0GB/35 ' NEFF (neff-home.com)

The grill element has an internal short and needs replacing. Sometimes you can see it as a slight bulging of the element. This happens just before it blows a hole. It may also have been physically damaged when something was put in there after a few Sherries. :>D Sounds like your RCD is adequately sensitive.

See Troubleshooting section of manual on page 25. It may help untitled (neff-international.com)

Check out this video on replaceing a element on a Neff. https://www.youtube.com/watch?v=YXMBwx3X74E Best to you.

Take a look at the videos. I looked for wiring diagrams. https://www.google.com/search?q=neff+model+b1442n0gb+element+wiring+diagram

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwiwgLHn8vL-AhURAzQIHRE9BqIQFnoECBsQAQ&url=https%3A%2F%2Fwww.fixya.com%2Fsupport%2Ft29925510-neff_steam_over_error_code_e5123&usg=AOvVaw1yI-sjEM1vvRntCUJzF6u2