Ultra Sun 2 Motherboard 501-3132 REFURBISHED - Answered Questions & Fixed issues


Larry the Computer Guy, posted up there ^^^^ instead of here.
  • Larry Ng Jan 19, 2021NO PC told no maker no model
    no UW SCSI card told, at all. (Adaptec?)_
    SCSI can run HDD, or tape and many things
    what does yours run? IDK.

    we run ultra for years, back when.
    why are you doing old UW SCSI.?
    tell what tool means,. ive no idea at all
    a metal tool , software what?
    tell what the tool does? and we now can communicate.
    only very very old full blown workstations
    had a UW SCsi HDD, non told yet.

    what does not responding mean./
    1: PC dead silent..
    2: all fans dead.
    3: power on LED dead or acts odd now.?
    4; BIOS screens dead./ all ? this is goal #1
    5: hdd boot files not found error on screen.
    6: any beep codes, any LED blink codes.
    id have to ask like 100 question more
    with you not telling make of PC , model of PC and where is this SCSI port, show 1 photo of
    the inside of PC left side and AHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH

  • Anonymous Jan 19, 2021
    pure raw wild guess.
    the PC is 20 year old
    the HDD died 15 years ago
    and found this rig for $1 at a garage sale
    DOA.
    Ultra-320 SCSI ? from year 2003?

    remove it and put in SSD 2.5" solid state drive (SATA) and boot from that.
    end story, join the modern world?
    SCSI is now dead, tech. as in fully retired.
    we use SAS or fast SSD. now.

  • Larry Ng Jan 19, 2021
    if the HDD is dead say so.
    post symptoms and ask for help,ok?
    that is why this forum exists to diagnose problems.
    test #1 on PC that seems to have power and does with BIOS screens working
    the HDD must be heard to spin. (and all fans)


    ask how. (i own a 5$ stethoscope a TOOL)
    no spin ,no joy, possible.
    it has motor inside, the hdd controller
    sends a command to the hDD to spin up
    turned on, in magical SCSI land
    we can even sequence say 5 HDD drives to spin up 1 at a time to not overload the PSu.


    that is all controlled via the SCSI card
    own Bios screens. prompted at power on in fact.
    the SCSI card has its own menus inside its own ROM.firmware. we go there and check the drive out. (might show HDD dead in fact)


    NO PC told no scsi card told.

    here is mine spinning up now.https://pcdied.com/HDD-SDD/spoolupjet.mp...

    if HDD click like mad , the HDD is bad.
    like this.
    https://pcdied.com/HDD-SDD/WD-bad-heads-...*****.mp3

    post of photo or left side inside this PC.
    lid off PC pulled off. (then add a photo)
    then we can talk turkey. (to brass tacks)

  • Anonymous Jan 19, 2021
    have scsi now
    or dreaming of 2003 old dead parts to buy cheap. tell the story fully dude. we can not guess what is up there.
    did i nail this?

  • Anonymous Jan 19, 2021
    post a problem, and ask for help
    please.
    what PC
    what OS
    and what fails. tell all that.
    even tell what works good too?

  • Anonymous Jan 19, 2021
    the reason nobody talks SCSI now is that it is now retired. (eol)
    yes some very very old PCs workstations had this, OOBE day1. sure. have one in my attic full of thick dust. old and slow.
    and for sure servers. old.

Ultra Computers... | Answered Yesterday | 19 views


is that version compatible with win 10
if it is not , that will be the basis for your problem

Ultra Computers... | Answered on Mar 01, 2020 | 81 views


I typically advise that drivers be downloaded from the manufacturer's website. The help desk may be able to advise you as to a download link. help centre on 011 541 3300 or email [email protected]

This is a company based in South Africa.

Although other websites may offer drivers, I cannot assure you such would work nor assure you that such downloads would be safe. I would certainly make a system restore point prior to downloading or installing any such drivers in any case.

Ultra Computers... | Answered on Aug 16, 2019 | 26 views


you just need to buy an adoptor, like "1 fits all". but you also can use the cable that you charge it if the head gets off

Ultra Computers... | Answered on Aug 15, 2019 | 22 views


Please visit the website below for calibration or support.https://www.breathalyzers.com/index.php/alcohawk/alcohawk-calibration Looks like you have to send your unit away to have it calibrated. I would send them an e-mail enquiring about cost details before posting the unit to them. And double checking the postal address where the unit needs to be sent.

Ultra Computers... | Answered on Apr 22, 2019 | 32 views


Sounds like power board. Do you get a blinking like at power up? If so, blinking code will indicate problem. Contact store or mfr. Could still be under warranty.

Ultra Computers... | Answered on Mar 31, 2019 | 30 views


Software claims to do this for you:

https://www.partitionwizard.com/help/convert-NTFS-to-FAT.html#howto


https://www.partitionwizard.com/help/convert-NTFS-to-FAT.html

Convert NTFS to FAT32

Ultra Computers... | Answered on Sep 26, 2018 | 41 views


Sorry we are not an appraisal website.

Ultra Computers... | Answered on May 18, 2018 | 45 views


You would have to dismantle the laptop and remove the BIOS battery for 5 mins then re-insert it to reset the BIOS to factory setting. I found this reset option (picture below) online but have never tried it ..............

capture-e4a2v32stn4jawoct3vivien-1-0.jpg

Ultra Computers... | Answered on Jan 31, 2018 | 59 views


Not for this site.

Ultra Computers... | Answered on Sep 07, 2017 | 31 views


check in the bluetooth settings to pair the keyboard to the ipad and on the keypad of the case check for a button that says pair on it

Ultra Computers... | Answered on Aug 22, 2017 | 796 views


You need to install software to make the added drive function.

Ultra Computers... | Answered on May 04, 2017 | 58 views


My Passport you mean your portable hard disc or something else ?

Ultra Computers... | Answered on Dec 02, 2016 | 86 views


Hi, I don't actually know how to unlock your specific TV. But here is a basic guide to unlock your tv.
    1)Turn on the TV and grab the remote.
    2)Look at the screen. If you see a blank screen with a red key on the bottom of the screen, press 'Function' and 'Mute' at the same time. This should unlock the channel. This should unlock the channel. This is an option for people who want the TV to stay locked out, want to be able to bypass the lock to watch a certain show or channel. All others channels will remain locked and the TV will fully lock when it is turned off.
    3)Unlock all of the channels on the TV by entering the factory reset code. There are 3 main reset codes that TV Manufacturers set. These are 0711, 6688 and 3308. Try each one until you find the one that works. This will factory reset the TV.
    4)Call the technical support service number in your owners manual if none of those codes work. A technician can help you troubleshoot the television because the problem may not be the locking control. When you call, make sure you have the model number and the serial number.
    5)Or take it to a TV repair shop.
How to Unlock TV eHow

Ultra Computers... | Answered on Dec 27, 2015 | 125 views

Not finding what you are looking for?
Computers & Internet Logo

0 questions posted

Ask a Question

Usually answered in minutes!

Top Ultra Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Vebble

Level 3 Expert

395 Answers

Are you an Ultra Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...