20 Most Recent Electrolux EIFLW55HMB Front-Load Washer With IQ-Touch Controls - Page 8 Questions & Answers

Hello sreenivasulu, if you are receiving error code E30, first check if it is a false error code by resetting the power to the appliance by either unplugging it or flipping off the breaker for about 30 seconds. If the error code persists, it could potentially mean a number of things: a pressure sensor issue, defective wiring, valve assembly problem and/or control board issue. I would strongly recommend connecting with an expert technician to assist further.

Get warranty service if new.

The EHO (or EH0) error indicates a problem with the incoming power or an electrical problem inside the washer. Unplug the washer for a while to reset the error code. Next check your wiring and make sure that the outlet doesn't have a fault. If you live in an area with brown-outs or wires that touched during a storm, wait until the electricity is repaired. Then check if the power supply to the washer was damaged by the surge or changing power levels. If these aren't responsible for the problem, you'll need to check the wiring for shielding damage, the wire harnesses and the rest of the washer. There is a parts diagram here: http://docplayer.net/60693214-Spare-parts-list-household-washing-machines-pnc-elc-brand-model-market-electrolux-ewf10842-th-washing-machines-front-loaded.html . I hope this helps. Cindy Wells

https://www.electrolux.com.sg/globalassets/5-support/manuals/en-sg/ewt903xs-troubleshooting-guide-en-sg.pdf

It is the customer fault code. Simply turn on and turn off appliance. E11 - problem with fill water E21 - problem with draining water E41 - door open All other errors require service staff !!!

The door of the washing machine cannot be opened here.3. Perform emergency door opening On some machines the door can be opened in an emergency by pulling down on a bar using a screwdriver or similar object, for example. If the machine has an emergency release, it is located next to the fluff filter. See the full description in the user manual. Note: Make sure that the water level inside the drum is not too high. If necessary, proceed with an emergency drain.

Warning: Risk of burns! Make sure that the water temperature is not too high and the laundry is not hot. If necessary, wait until they cool down.

Warning: Risk of injury! Make sure that the drum is not rotating. If necessary, wait until the drum stops rotating.

4. Reset the machine Switch off the power to the machine and then switch it on again after about 20-30 seconds. Then test whether the machine is working normally. 5. Contact an Authorized Service Centre If the door cannot be opened without water in the machine and the above advices do not resolve the problem, we recommend requesting a visit by a service engineer.

NOTE: Depending on the problem, you may be charged for a service visit by an engineer, even during the warranty period.

Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so

which light is flashing & what colour it is e.g (Start, End, door open, etc.)

water leaking means a gasket is needing to be replaced.

6.1 Child lock function This option prevents children to play with the appliance while a programme operates. The programme knob and the touchpads are locked. Only the on/off button is unlocked. Activating the child lock option 1. Press the on/off button to activate the appliance. 2. Press and hold touchpads (A) and (D) at the same time until the child lock indicator comes on. • It is possible to deactivate the child lock option while a programme operates. Press and hold the same touchpads until the child lock indicator goes off. Dado

Family error code E10 is visible to customers and (could be E11 and E13 only visible in service mode) means problem with filling water. I suggest rapid reading alarm code when appliance is in normal operating mode (e.g. during the execution of the washing programme). Press and hold down START/PAUSE and the nearest option buttons for at least two seconds: the LEDs initially switch off, and then display the flashing sequence corresponding to the last alarm. The alarm sequence continues as long as the two buttons are held down. Before anything first check filter on solenoid valve and filter on inlet hose. Also, check is there any water inside drum, means that last drain phase is finished and pressure switch is in empty position. E11 - Tap closed or water pressure insufficient; Drain hose incorrectly positioned; Water fill solenoid faulty; Leaks from pressure switch hydraulic circuit; Pressure switch faulty; Wiring faulty; Circuit board faulty¸. E13 - Drain hose incorrectly positioned; Water pressure insufficient; Water fill solenoid faulty; Leaks or blockage in pressure switch hydraulic circuit; Pressure switch faulty; Circuit board faulty. Dado

E11 is a water flow issue. Make sure water is on, hoses aren’t linked, screens in hoses and valve aren’t clogged with debris, and that hot and cold hoses aren’t reversed. If all that’s ok, then water valve probably needs replacing

As you say bought new suggest you contact suppliers and under guarantee should be replaced free of charge . hope still under guarantee time limits shouldn't run might cause damage ?

Did you check the screw out filter plug that is in the

Repairclinic.com or searspartsdirect.com

Between tub hose and drain pump.