20 Most Recent Electrolux ICON Designer Series E36IC80ISS Black 36" Induction Cooktop with Stainless Steel Rim, 5 Questions & Answers


Hello - Typically error code E on Electrolux induction cook top indicates an error with the user interface board/control board. Contact a professional to move forward accurately and properly diagnose/repair the unit.

Electrolux ICON... | Answered on Mar 21, 2020


Good Morning sisutl, thank you for your question!

Could the error code possibly be E-21? If so, this error is commonly referred to an issue with the oven thermal sensor. Typically, the over thermal sensor is in the open position. A professional would need to verify continuity of sensor harness and connections. Depending on an accurate diagnosis the part may need replacing. I hope this information help to some degree.

Electrolux ICON... | Answered on Sep 12, 2013


there should be identifier letters on the terminal board use a magnifier follow the lines that come from each connection on the board.

Electrolux... | Answered on Nov 29, 2019


https://www.support.emea.electrolux.com/en-uk/Hot/Hob/Hob_displays_error_message_E9

Electrolux... | Answered on Nov 28, 2018


Searspartsdirect.com has parts lists and diagrams if you have your model #.

Electrolux... | Answered on Nov 08, 2018


You would have to compare owners manuals and installation instructions of both models.

Electrolux... | Answered on Oct 21, 2018


The breaker can still be the problem. The way to prove it is to measure the voltage at the wall plug where the cook top is plugged into the wall. Unplug the cook top and look at the pattern the plug contacts make. Should look something like a Y. Using a volt meter set on AC and 240 volts put one lead in the bottom leg of the Y and the other lead on one of the other leg contact. You should read 120 volts on each leg. If one leg has no voltage, replace the breaker in the panel. If the voltage is present on both legs of the plug then the breaker is good and the problem lies in the electronics of the cook top or perhaps a burned out heating element.

Electrolux... | Answered on May 27, 2018


Unplug the range then you need to take the side panel off and there will be a slide out tray with the lower element in it. Disconnect the old element and reinstall the new unit in reverse order. Hope this helps

Electrolux... | Answered on Mar 26, 2018

Not finding what you are looking for?
Electrolux ICON Designer Series E36IC80ISS Black 36" Induction Cooktop with Stainless Steel Rim, 5 Logo

Popular Tags

10 questions posted

Ask a Question

Usually answered in minutes!

Top Electrolux Cooktops Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

gbob59

Level 3 Expert

3063 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you an Electrolux Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Electrolux Cooktops

  • Electrolux Cooktops

Most Popular Question

error message electrolux induction stove

  • Cooktops
Loading...