20 Most Recent
Bosch Aquastar 125B Water Valve Assembly conversion kit - 8707002499 - Page 4 Questions & Answers
I have a Bosch Tankless
Before calling service technician, open following link for Bosch troubleshooting resources including parts, contact, possible manual, possible service bulletin covering replacement:
http://waterheatertimer.org/Troubleshoot-Bosch-Tankless-water-heater.htmlUpvote the help.
And take advantage of fixya expert assistance live.
For a price, expert works with you while you work on water heater or any do-it-yourself project.
Fixya is always less expensive than a service call.
Water goes cold 1/2 way thru shower.this has already cost me a new regulater.probable cause?
Could be one of three things first the dip tube on the cold side of your water heater could be broken off which would cause the cold water took to come out of the outlet side of the water heater to soon before being heated all the way which can be replced second your water heater could be full of sediment to the point where you're not getting the full amount of hot water so you would need a new water heater and third it could be a bad cartridge in Your Shower depending on the type of valve you have which could cause the water to mix. third one is least likely
Bosch water heater
People often think it is EO, but it is EC. Depending on the age and instalation, ithe may be a very simple repair. EC is a failure to ignite.
I've got a Worcester Bosch boiler had a leak In the pipe On the landing so a friend emptied the boiler an I fixed the pipe but I don't know how to refill the boiler
Can you get the manual online? You have the Manufacturer info so you probably have the model number too. I found a manual on Manuals.com for my boiler so they may have yours too which will hopefully have some information on filling boiler although I realize each installation is somewhat different but that's why it's difficult to answer you question. Usually there is a manual pressure valve that regulates the water pressure in the boiler which is usually pretty low...like less than 20 lbs. The manual should tell you the pressure as well. But this pressure valve has a flip handle that comes off the cold water line to the boiler to do just what you want to do...refill it with water. When refilling the boiler (if you find the valve, you may have to purge the air out of the lines which there is a whole other process for. But you shouldn't allow cold water into a hot boiler...it could crack it when the cold water hits the hot cast iron. So make sure the boiler is cool when filling it up.
Now go try to find that manual!
Not finding what you are looking for?
