20 Most Recent
Acer (91.48T37.003) CD-RW/DVD-ROM (Combo) Burner Questions & Answers
My Acer Extensa 5630EZ making
This sounds as though the ACER unit is defective, the CD is turning around on a spindle which is either lopsided, or is bent. To save yourself the problem, replace the drive, if this is a new drive, go to ACER's website, request a work order, and send in your drive.
2/3/2011 7:23:06 AM •
Acer...
•
Answered
on Feb 03, 2011
When I play a cd the drive vibrates very noisily
The vibration is from the fast rotation of the drive spinning the cd. Many newer drives do this. the only solution would be to place an older slower drive into the computer.
6/19/2009 9:33:28 PM •
Acer...
•
Answered
on Jun 19, 2009
Dvd driver
go into My computer and make sure its recognizing your dvd drive. If its not then you'll need to turn off your laptop and reseat the drive could be that its not making a good connection. If it is being shown in my computer and it can't read any dvd's then the drive is bad and would need to be replaced.
2/11/2009 3:04:33 AM •
Acer...
•
Answered
on Feb 11, 2009
Defragment of disc
if defrangmentation mean:
defragmentation is a process that reduces the amount of
fragmentation in
file systems. It does this by physically reorganizing the contents of the disk to store the pieces of each
file close together and
contiguously. It also attempts to create larger regions of free space using
compaction to impede the return of fragmentation.
how to defrag mean:
"Right click the my computer menu then click then manager their you select the defragmentation"!
7/11/2008 4:00:08 PM •
Acer...
•
Answered
on Jul 11, 2008
Playing vcd in acer dvd
sounds like a codec issue, try this codec pack
http://www.free-codecs.com/download/K_lite_codec_pack.htm
hope it helps
7/10/2008 7:52:10 AM •
Acer...
•
Answered
on Jul 10, 2008
Acer aspire 3500 DVD ROM making noise
type of noise ? It might just need a cleaning. Try using a compress air can to clean. Look inside to see nothing is stuck in there.
5/7/2008 3:00:51 PM •
Acer...
•
Answered
on May 07, 2008
Acer T690 dvd not recognized
is this an ide drive? have you look for the jumper, single drive on one ide have no problem, but for two drives, one must be slave and the other a master. configuring your ide connections may fixed the problem.
12/10/2007 12:04:50 AM •
Acer...
•
Answered
on Dec 10, 2007
My disc tray is broken
Yes just follow these steps
1)turn off your comp and open your cabinet..
2)disconnect the power and IDE cables connected to the drive
3)Unscrew the screws holding the top cover and lft the cover upwards..
4)Now you will be able to see the lens tray etc..Just locate it and gently push it to the correct position..
If its broken into two you will have to buy a new one..You a get it at any computer accessories shop..
Good luck!
Please comment before you rate..
10/22/2007 1:15:13 AM •
Acer...
•
Answered
on Oct 22, 2007
Mpowering technology pop up
Couldn't get rid of mpowereing technology pop up. Tried every solution offered by the internet. Finally I noticed when I powered up my computer the pop up showed up even before the computer loaded anything. I turned off the power to the monitor and powered it back up an viola, pop up gone. The Acer monitor had generated the pop up.
My Acer X1110 switches off as soon as blue light comes on?
it needs service, and service manuals are hard to find on anything by the likes of ACER.
this projector worked for 12 long years, did you own it 12 or bought a bad projector, no history told as I can buy dead projectors all day long. and hard nut problems even hacking done.
Acer X1110 data projector Standard throw projector..
did you know most projectors have serious grade protective devices inside??? (tamper and overheating are 2)
did you read owners manual page 32 yet, errors.
LED codes.?
there are 4 LED, and all 4 matter, projector turned (ON) (not one =1)
also in pairs glowing and also if blinking or not, so read page 32
it tells all that.
my guess is overheat failures, even cold, due fan slow or packed in lint after 12 years of use and no service done,.
https://manualzz.com/doc/49497108/acer-x1110-user-manual
some have dust filtler
a shop first cleans is out first, and check fan RPM with and LED tachometer.
this is all SOP.
''e'' button :acer empowering technology
That button can be set using the utility on your programs list
It maybe that you accidentally turned it off or set it to do some other task.
Start there first before re-installing the program that sets it.
That is on one of the cds that should have come with it and can be installed by itself.
Not finding what you are looking for?