Panasonic S24C40KAU6 1/20 HP, R-134A Compressor - Page 9 - Answered Questions & Fixed issues

All you ever wanted to know about Panasonic can be found at the link below. The short answer, Japan.

Panasonic... | Answered on Mar 07, 2011 | 54 views

does the t-stat have a button for emergency heat?

Panasonic... | Answered on Mar 05, 2011 | 59 views

you have to give more information.

Panasonic... | Answered on Feb 25, 2011 | 86 views

maybe your selector switch deffective try to replace it.

Panasonic... | Answered on Feb 13, 2011 | 50 views

You have to clean air filter, cooling coil and blower wheel by every 6 months to work properly. Please follow this video.


Panasonic... | Answered on Feb 08, 2011 | 2,437 views

theres only 1.5 tr no 1.6tr a new model is inverter type which has price value is from745$ to 2368$ try to canvass to your nearest panasonic dealer

Panasonic... | Answered on Feb 05, 2011 | 51 views

Check power to air swing. if it's in window a/c. If power, motor is struck or open.Replace motor.
If it's with DC connection, you have to replace motor if not working. Thanks.

Panasonic... | Answered on Mar 16, 2014 | 503 views

1TRof Refrigeration = 3.516 KW. !tr-12,000 BTU. Your's is 24,000BTU.Hence 2 X 3.516 KW= 7,032 kw.
Hope, helpful?

Panasonic... | Answered on Feb 04, 2011 | 55 views

As you have not mentioned any model/BTU/error code, i could help you only by giving this following site; Panasonic CAS (HP) CS-F14 18DB4E5


Panasonic... | Answered on Feb 02, 2011 | 1,569 views

It's the remote, and it's dying: the diode that sends the IR signal stops working when the temperature is high. Soon it will stop working at all so you will have to replace it. You can replace just the diode, but it's a fiddly job that will cost almost as much as an entire new one - better replace it whole

Panasonic... | Answered on Feb 16, 2011 | 302 views

there are two ways to fix the condenser. By clamping on wall or by seating on slab/sunshade.

You can keep on slab by screwing on four leg corners. Clamping on wall please check this video:
Hope, it's helpful.

Panasonic... | Answered on Jan 26, 2011 | 21 views

de activate this at indoor controller be removing the clock sign from the display unit will now work as and when as per controler

Panasonic... | Answered on Jan 21, 2011 | 30 views

Check fan contactor relay struck.Replace it.

Panasonic... | Answered on Jan 20, 2011 | 180 views

Diagnosis display = H00
Abnormality / Protection control = No abnormality detected
Abnormality Judgment = Nothing
Emergency operation = Normal operation.

Your unit is under timer set up. Please keep remote towards indoor sensor press timer on and change to 00.00 . If you get beep sound, switch off a/c and then restart.

Panasonic... | Answered on Jan 11, 2011 | 1,628 views

Simple- Short cycling : Check coil and room sensors. Misplaced or fell down. Fix in right position.

Panasonic... | Answered on Jan 09, 2011 | 158 views

Hello, I have looked up this unit with no feedback on the meaning of what your codes stand for on Panasonic models like yours. The operations and trouble shooting manual is no longer available to download anymore as I was told. I can have you try to remove any batteries from the remote to see if this will rest this unit. If so, great. If not, I will continue my search to help you solve your problem at this time, and get back to you.
A/C, Heating, & Refrigeration Contractor

Panasonic... | Answered on Jan 12, 2011 | 425 views

Power straight a way to out door unit through jammed /struck contactor . When you start power on,power not going to out door by transmission of indoor thermostat calling.

Replace out door contactor.

Panasonic... | Answered on Jan 05, 2011 | 224 views

F00 fault is a short circuit or grounding out in the low voltage (safety) circuitry. Check in your thermostat (Y1). Hope it's helpful?

Panasonic... | Answered on Jan 05, 2011 | 333 views

Can you tell me the exact model of this air conditioner so that we can assist you further.

Panasonic... | Answered on Jan 04, 2011 | 24 views

E2Fault indoor coil out sensor.

Indoor Pipe Sensor or Outdoor Sensor Assy fault, Open or Short. Disconnect from PCB and measure resistance. Air sensor = 10 kOhm at 25C, Pipe sensor = 5
kOhm at 25C. If not replace sensor.

Panasonic... | Answered on Jan 04, 2011 | 277 views

Not finding what you are looking for?
Panasonic S24C40KAU6 1/20 HP, R-134A Compressor Logo

0 questions posted

Ask a Question

Usually answered in minutes!

Top Panasonic Heating & Cooling Experts

Bill Long

Level 3 Expert

606 Answers

Dennis Boxerman

Level 3 Expert

1300 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Panasonic Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides