Top 20 AOpen EZ65 (ez65white) Barebone Questions & Answers

no question asked at ALL./? AOPEN ENDED SUPPORT 2011 AS PROVED HERE The internet grave yard. https://web.archive.org/web/20111001000000*/aopen.

Here is pinout. Pin2 key is missing pin
1 reset+
3 reset- (gnd)
5 pwr led+
7 pwr led- (gnd)
9 n/c
11 n/c
13 n/c (gnd)
15 n/c
17 n/c
19 n/c
2 key (missing pin)
4 pwr sw +
6 pwr sw -
8 hdd led+
10 hdd led-
12 n/c
14 n/c (gnd)
16 n/c
18 n/c
20 n/c (+5v)

n/c = no connection

Here is the pinout. Note key pin 2 missing.
1 2
reset+ O X key
reset- O (gnd) O pwr sw +
pwr led+ O O pwr sw -
pwr led- O (gnd) O hdd led+
-- O O hdd led-
| O O --
| O (gnd) (gnd) O |
n/c -| O O |- n/c
| O O |
-- O (+5v) O --
19 20

Bios batteries don't usually have a specific place on boards. I have seen the same boards with the batteries in different locations. The best thing to look for is a nickel size silver circle. This is the battery. It can either be standing up on end or laying flat on the board. You can tell further its the battery because it looks like a large watch battery.

From the images I can find online it may be next to the IDE ports and the power port near the front of the board. Back of the board being where all the hookups are for audio and video.

Jei

buy dead? or lost the PC power pack in a move? so PC never ran for you before lost power pack? history ? many power packs marked universal are junk, totally for many reasons. (watts too low, wrong voltage and worse pin out wrong.) a very old core 2 PC. Intel GM45 chip set ich9m ,circa 2009. the power pack by them is here from your manual. "90W (20Vdc, 4.5A) AC TO DC POWER PACK Adapter AC 100 ~ 240V" input) below 90watts is NO GOOD AT ALL, no pack told by you.

welcome to the www, where answers are www told parts not sold buy the oem, are sold used on the web. using 3 ways. 1:ebay 2: amazon 3; or google planet earth for it. there is no other way there are 3 cures here. 1: find the rare board on earth. 2: upgrade it to better newer board. that is supported, asus is best. 3: fix your gee no symptoms told, and the coin cell is dead.4: 4: buy a newer PC not this junk. or DYI PC ASK ! your relic is too old to expend real cash on it ever. 2001 TECHNOLOGY, 21 YEARS OLD. Intel Pentium 4 CPU Socket 478 533MHz Chipset Intel 845GV ( ding ding ding relic, bell rings) Intel ICH4 omg no SATA PORTS , NO PCI EXPRESS SLOTS . DEAD FOR NOT USEING 4 PIN AND 20 PSU CABLE TO PSU OOPS.BOTH POWER CABLES TO MOBO MUST BE GOOD. NO W7 AND UP SUPPORT , INTEL.COM SAID SO. BUY OR BUILD A PC WITH I3 , INTEL CHIPSET UP. CHIP SET H55 UP 2010 UP. I7 ,4 CORE YES.

Is there a floppy disk in the A: drive? That "port" is usually reserved for a floppy disk, either 3.5 or 5.25in. You probably need to disable the floppy drive in the BIOS.

WHY POST SPANISH HERE? 2005 RELIC , 12 YEARS OLD DAY OF POST, I have an AOpen F2705-16S LCD monitor, what happens is that I was doing maintenance on the monitor and the pin slot of the cable that is connected to the computer broke and I did not have the configuration and every time I try to join the cables but I always get No signal appears, any help would be good, thank you, I'll wait for an answer soon???????? ANSWER YOU BROKE THE CABLE AND MEANS NEW CABLE TIME. ALL THINGS IN LIFE BROKE, NEEDS TO BE REPLACED ON THIS OLD MONITOR THE VGA CABLE IS HARD WIRED, INTO THE DISPLAY ELECTRONICS MAIN BOARD AND , THE CABLE IS NOT SOLD. MOST OF THESE ARE DEAD NOW CCFL BLACK LAMPS DEAD LONG LONG AGO AND HAVE NO FUTURE AT ALL BUY A 2011 OR NEWER MONITOR LED AND WIN

IN A HURRY NO? BUY MACRO KEYBOARD USB GOOGLE THAT AND FIND ONE AND BUY IT. REGULAR KEYBOARDS ARE NOT PROGRAMMIBLE TO SO THIS IS WINDOWS ( NO PC TOLD OR OS TOLD) YOU;D HAVE TO HACK THE KEYBOARD DRIVER. IN WINDOWS AN APP CAN BE PUT IN THE TASK BAR ICON AND 1 CLICK AND IT RUNS, IS THIS HARD?

show this. old PC have dead coin, 1st things first then see the model here, mx3w here, a true relic 20 years old

gee a dead PC can do that does this old monitor work in 2nd good pc. Yes/no, what could be more easy for simple test. 5min work? the manual for it covers this. lite me make a list. 1:reset the OSD screen via the reset options. 2: turn off all auto modes in osd. 3;turn off auto, input select mode and set it manual to the correct port not told. 4 turn off auto scaler if not using VGA, or it will fail 5: demo mode may be automatic if PC is dead outside USA are you? we have laws here banning that act celled energy star, and the monitor just goes to sleep, no demo allowed here is not green./ it is not burn in, as doing that even invites LCD burn/ghosting so is not that it is demo move and keeps moving to avoid burned lcd elements. but gee Aopen monitors stink, so, who knows no? F90GS (2005 and before says warranty page) the make does not support it down they ended legacy all huge limit here is 1280 x 1024 @75Hz the demo mode is a self test mode, it shows all is good, visually. newer monitors now, have this as an option called test pattern. each maker and model are different but ours go blank sleep. why not be the first to ever post a video of so called burn in. below click video and provide it. we love videos of screens and saves endless answers guessing what you saw. screens have vast ways to fail, i think ive seen them all as teck for 50 years. yes back to mainframe days and VT52 and older. do the reset in OSD and /or unplug it from wall AC and hold in powerbutton to mon, and at same time plug AC in and hold together that and for 10 seconds and release the power button , some do reset this way . or unplug the monitor from wall AC overnite. this can cure lightening hit latch up events. amazing no.? also 3? kids playing with this monitor may have turned on demo or self test mode, I say cut their allowances.(grin)

sold in what country..../? not here in USA. I can find.but support at Aopen ended in 2011 see proof herehttps://web.archive.org/web/20111001000000*/aopen.comin real shop we just look , if no manual to be foundas in this case.yours is 2003 made, with Pentium M CPUmost laptops have one but some do not (rare)some are just pull one hatch cover and easy swapothers are 30 to 70 screws to remove even the whole MOBO pulled out and turned over hard nut cases.this PC is rare as hens teeth.and the maker does not support it. ok the 1557 shows this and is the model full version of the series 1500 from 2003 year, OMG oldRemoving the RTC Battery1.See "Removing the Battery" on page 552.See "Removing the Middle Cover" on page 593.See "Removing the Keyboard" on page 604.Disconnect the RTC cable from the mainboard and remove the RTC battery.

You can go to the link below and enter the board name is a MX4GER and that will give you your manuals Download Center

I am assuming that you are replacing or installing a new mobo. You need to read the manual to see if it has an option for speakers, most do. You need to look the details for the "front panel" where you connect wires for power, hard disk lights etc.

cmos to change

if you are directly connected to the router via ethernet go through the ip gateway, open up a web browser usually d-links ip gateway are 192.168.1.1, you might have to look up you model. Also note you may have a default login and password, such as admin for password and admin for user. note you can also reset the password on the router by holding the reset button for 10 seconds. More questions heres a refrence guide http://www.dlink.com/-/media/Consumer_Products/DSL/DSL%202750B/Manual/DSL_2750B_B1_Manual_v1_00_EN.pdf

http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=23&PFid=23&Level=4&Conn=3&DownTypeID=3&GetDown=false#1

number?

If you open your motherboard, then you can see a lot of input and output ports behind the motherboard, where you connect VGA, mouse, keyboard etc wires at that place there is a 3.5mm jack which may be green in color, you can connect specker wire there A red mark is shown