20 Most Recent AOpen DUW1608/ARR (914ID37002) DVD±RW Dual Layer Burner - Page 3 Questions & Answers

Hi, Do nothing with the hard disk. Remove it and mount it on another working machine. Use the second machine to run recuva.

check memory, it is a system timer failure (if the beeps are short), usually its because of bad ram, but if u took it apart could be you just need to check how you inserted the RAM.

Great comedy, but I believe they are both deceased. R.I.P.

What relay are you talking about? The only computer I know of that may have a relay in it is from the 1940s. Aopen didn't exist then.

Hello,1> Click Start and then Control Panel2> In Control Panel, if you are in Category View, click on Switch to Classic View3> Open Regional and Language Options in Control Panel.4> Click on the Languages tab.5> Under Supplemental language support, select the check box beside the applicable language collection6> Click OK or Apply. You will prompted to insert the Windows CD-ROM or point to a network location where the files are located. After the files are installed, you must restart your computer.Thanks..

Hi,1> Click Start and then Control Panel2> In Control Panel, if you are in Category View, click on Switch to Classic View3> Open Regional and Language Options in Control Panel.4> Click on the Languages tab.5> Under Supplemental language support, select the check box beside the applicable language collection6> Click OK or Apply. You will prompted to insert the Windows CD-ROM or point to a network location where the files are located. After the files are installed, you must restart your computer.Thanks..

That will depend on the motherboard model and the symptoms and when you get the beeps. Try giving us a chance to provide a fix and we will at least give it a go.

Although this question is really old I would like to answer it as I had the same problem a few days ago. This first answer from ikkenom is not really good, it is to general.If your Aopen XCube UX45G forgets BIOS settings like time, boot order or other options it is very likely that the battery needs to be replaced. To replace the CMOS battery of the XCube UX45G you need a new CR2032 battery. The battery socket is a bit hidden. It can be found next to the IDE ports. See this image: http://www.informationsarchiv.net/uploads/image/8182/xccubeez65-25.JPG . First turn of the power chord, remove the battery as ikkenom described and insert the new battery. The positive pole (+) has to be positioned in the way that this pole can "see" the RAM slots. Turn back power chord, start the computer und reset BIOS settings.

If you are using a CD drive, it is probably just too old and can't read anything anymore. Try running an Optical Drive (CD) cleaning disc in it.

Hello here is the homepage:http://global.aopen.com/products_download.aspx?sDropDownProd=52Good luck

What is your problem?

Since it is a socket 370 motherboard I doubt it draws a lot of power no matter what kind of AGP video card you have in it. Your board also only has a 20 pin connection for its main power to the motherboard. So that being said I would pick up the Rosewill RV350 power supply for your computer. I have personally installed several of this very make and model for people and have never had one die on me yet... Here's a link to the very power supply you need and I think it's even on sale right now:http://www.newegg.com/Product/Product.aspx?Item=N82E16817182006

http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=23&PFid=23&Level=4&Conn=3&DownTypeID=3&GetDown=falseDownload the driver hereLet me know it successful