20 Most Recent AOpen AK77-8X Max (91.8A710.101) Motherboard - Page 4 Questions & Answers

What is your problem?

Since it is a socket 370 motherboard I doubt it draws a lot of power no matter what kind of AGP video card you have in it. Your board also only has a 20 pin connection for its main power to the motherboard. So that being said I would pick up the Rosewill RV350 power supply for your computer. I have personally installed several of this very make and model for people and have never had one die on me yet... Here's a link to the very power supply you need and I think it's even on sale right now:http://www.newegg.com/Product/Product.aspx?Item=N82E16817182006

http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=23&PFid=23&Level=4&Conn=3&DownTypeID=3&GetDown=falseDownload the driver hereLet me know it successful

1. Click Start, and then click All Programs.
2. Click Accessories, and then click Run.
3. Type regedit, and then click OK. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.
4. In the navigation pane, locate and then click the following registry subkey:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
5. In the right pane, click UpperFilters. Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only. If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to step 8.
6. On the Edit menu, click Delete.
7. When you are prompted to confirm the deletion, click Yes.
8. In the right pane, click LowerFilters.Note If you do not see the LowerFilters registry entry, unfortunately this content cannot help you any further. Go to the "Next Steps" section for information about how you can find more solutions or more help on the Microsoft Web site.
9. On the Edit menu, click Delete.
10. When you are prompted to confirm the deletion, click Yes.
11. Exit Registry Editor.
12. Restart the computer.

More than likely this is a power related issue. To fix the monitor, bad electrolytic capacitors may need to be replaced via soldering / desoldering. I fixed my monitor this way and it had similar symptoms. Consult youtube for instructional videos.

if your computer came with a motherboard disc the sound drivers could be on it click start control panel administrive tools computer management device manager scroll to sound,video and game controllers you might see a yellow question mark? Right click to reinstall drivers or uninstall click start control panel sounds and audio,volume,advanced,speakers make sure you have selected the (((appropriate speakers))) also audio you will find 3 drop down lists make sure you have the correct settings there also click start control panel sounds and audio devices you can adjust the volume there also select speaker volume you can change your settings there you can also tick in the box place icon in taskbar if his does not fix the problem

have you tried this control panel sounds and audio,volume,advanced,speakers select the appropriate speakers from the drop down list or navigate to the device manager scroll to system devices + to expand,system speaker right click properties then select use this device (enable) also you might check the speakers plug/outlet is usually at the back of the computer you will have to open up the computer to check the lead attached to the rear of the input plug make sure the connection is good try cleaning your computer of dust using a fine air blower from a compressor making VERY sure that there is no MOISTURE in the air line specifically around the sound card and the CPU central processing unit dust causes static to build up in a computer make sure you have an earth ******** before touching any parts inside your computer hope this helps

i can give you a simple solution for that, first you will connect the reliance net to connect the device.

check your hard drive connection, check your boot order in the bios setting. If all are ok, boot from a bootable CD.
if it helps, vote and rate this answer below

Please state your question in clearer terms.

set the the hard drive jumper to Master,, if that dont work try Cable select and lastly slave, Some converters require specific jumper settings.

1. if you have recently attached anything to your computer detach it. (new mouse, keyboard, maybe you added a new ram-stick)

2. unplug the computer and start fresh.

3. attempt to boot in safe mode and do a system restore, or boot the windows disc and try to repair the problem.

please explain the exact error your receiving

When you are saying it starts but does not reboot, are you saying it does not reboot to windows? Do you have the origional OS disks? You may need to reimage your hard drive.

Sounds like a power supply problem to me.

Hello

Try to download internet explorer 8 which the facebook sites recommends. But if you problem is log in, just click on forget password below the log in menu.

Regards Kabayan