20 Most Recent Zanussi FJS1225W Front Load Washer Questions & Answers

0helpful
1answer

My zanussi's door wont lock

Front PCB faulty, if you remove pcb you may be able to resolder blown track on pcb totherwise it will require replacement.common problem with this model. Regards Advisor
11/9/2021 1:44:47 PM • Zanussi FJS1225W... • Answered on Nov 09, 2021
0helpful
1answer

The washing machine recently will

Hello! Most probably the carbon brushes from the motor are worn out.
2/26/2018 11:34:57 AM • Zanussi FJS1225W... • Answered on Feb 26, 2018
0helpful
1answer

Zanussi FX1465W aquacycle, beeps 5 times and end light flashes

I have the same trouble with my washing machine did you find a solution i have been told the PCB or motor drive system
10/23/2016 12:43:06 PM • Zanussi FJS1225W... • Answered on Oct 23, 2016
0answers
0helpful
1answer

I think the drive belt has gone as the motor sounds as if it is spinning but the drum isnt moving. How easy is it to fit a new drive belt?

I haven't worked on a Zanussi yet but usually once the top has been removed replacing the belt is a fairly straightforward and intuitive process - it is removing the top that tends to be the difficult part. I expect washer-driers would be more difficult but so far I have managed to avoid those.
3/16/2016 8:16:26 AM • Zanussi FJS1225W... • Answered on Mar 16, 2016
0helpful
1answer

E34 code what does this mean

Incongruence between level of electronic pressure switch and level of anti-boiling pressure switch 2 (duration of fault at least 60 seconds). Cycle is blocked with door closed. Could be: Hydraulic circuit of pressure switches; electronic pressure switch; pressure switch; wiring between main PCB and electronic pressure switch; wiring between main PCB and safety pressure switch; and finally main PCB. Dado
12/16/2015 9:10:43 AM • Zanussi FJS1225W... • Answered on Dec 16, 2015
0helpful
1answer

My machine wont spin it fills up and drains but

Don't know how to use dryer mode on my washer dryer.
3/23/2015 9:58:20 PM • Zanussi FJS1225W... • Answered on Mar 23, 2015
0helpful
1answer

DRYER NOT WORKING

E10 means theres no water going into the machine.Your machine has a triple water valve the 1 that feeds the dryer has proberly failed. Comes as a comp unit.
3/10/2015 8:19:52 PM • Zanussi FJS1225W... • Answered on Mar 10, 2015
0helpful
2answers

Just the power light comes on

Count how many times the red light flashes and how many the green light flashes.If its 1 green and 1 red thats water problems.If 2 flashes of red light check filter is clear and pump is free to turn.
8/14/2014 1:31:19 PM • Zanussi FJS1225W... • Answered on Aug 14, 2014
Not finding what you are looking for?
Zanussi FJS1225W Front Load Washer Logo

421 questions posted

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1482 Answers

Oloyede Monsuru

Level 3 Expert

1468 Answers

sheakhly

Level 1 Expert

33 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Zanussi Washing Machines

  • Zanussi Washing Machines

Most Popular Question

think drive belt gone as motor sounds as

  • Washing Machines
Loading...