ASUS TV FM Card 7135 (7135REMOTE) Video Capture - Answered Questions & Fixed issues

http://driverscollection.com/?file_id=23002 u can download the driver from this site

www.toutlesdrivers.com

you can download here

http://drivers-download-driver.com/tag/asus-tv-7135lp-tvfm

Try to get it HERE

its at the back of your computer it is color coded, primarily green, blue and pink. the usual color for audio output is green

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. https://homenol.blogspot.com/ https://electronicshelponline.blogspot.com/ If blinks continue without any pause, or the LED light stationery; the main board is faulty. Search the site by type in the "brand name" to your device; [Exclude the model number], in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. See the site by a desktop. Mobile view has no search box. If you are viewing it by your mobile, see it in webview'/

go to settings and turn up there because every device has it own sound control

That device has the capacity of about 700 Mbs. The fiber cable wont come all the way into your house. There is a point called Dmark that it stops and changes over to conventional wire. That device will work fine.

The backlight driver could be going bad. The ballast control board most likely is the culprit.

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Screen-shots to defective LCD panels are given. You can see and compare to that to your device, and can make sure about the fault to an extent.

Your Asus what phone tablet ? or a hand held tv what model information too vague

https://support.google.com/cloudprint/faq/2541828?hl=en

pc failure?replace PC

You need a mains adapterthat has Input 100-240V Output 19V - 3.24A and the input plug that fits into the power socket of your laptop. It does not need to be from ASUS.

Google search the Internet for a suitable power adapter, make sure the output voltage is the same and the amps is 3.24 or higher.

THE NETBOOK MUST HAVE WI FI IN IT. ANYWAY SEND ME THE MODEL NUMBER AND I WILL BE MORE SURE TO HELP YOU.
REGARDS.
PLZ. RATE THIS

http://cheaplaptopsforsale.org/buying-tips/laptop-ac-adapter-not-working-steps-to-resolve-the-problem/
Read the article above. It tells you how to solve this problem.
And if turned out your adapter was defective, the link below may be helpful for you.
http://www.chargerbuy.com/replacement-asus-ac-adapter-19v-4-74a-adp-90sb-bb.html

I own roughly 50 of the LG L1953TS monitors, and have this exact problem with a high percentage of them. Far higher than any other make/model I've ever purchased.

My only solution was to file a warranty claim with each one.

You might try speaking with LG customer service regarding what has to be a manufacturing defect. I wish you the best of luck with that, as their customer service towards me has not been particularly stellar.

No,not a problems,if it only 10 or 20 degree of celsius.Ur tv is not in an incloser like a cabinate,right?Because it harder for the heat to disapper,if tv it in a small incloser cabinate.

Hello,
You need to check the output voltages of the power supply to see which one goes off. It may be due to short circuits some where, Also check for open circuit, bulged capacitor.
To do this you must have basic electronics knowledge, because it will require you to open the back cover.
Take care.....

My Aveis remote does not have a code on it,in order to for Bell Express to program my remote for the receiver they need to enter the code into their system first,can you help ?