20 Most Recent
- Page 9 Questions & Answers
What is the method to set up the Belkin router?
•Users first to need to connect their computer directly to the cable or DSL modem.
•In the condition when the would see the login screen for the internet service, It is required to make a note for the username and password
•Individual no need to unplug the router or the DSL modem.
•Now it is required to plug the modem to the Belkin router's "WAN" port.
•From there individuals could connect a computer to one of the Belkin router's numbered ports.
•Users should now turn on the modem and wait for 10 seconds.
For those who still need help from the support team may dial the customer support number provided through the Belkin router technical support team. With the help of the experts, all major and minor issues will get solved quickly and instantly. Experts would provide guidance throughout the problem until it will not get solve completely. With the help of the experts, individuals would be able to obtain a concise and accurate solution.
For any kind of technical help during the process contact, Router Technical Support team to get an instant solution. They are available 24/7. Call Now ?+1 888 597 3962 for any Support.
More Info - https://www.quickhelps.co/phone-number/belkin/
No display on my asus P4GE-MX mother board
hi! im in philippines also.. did you here some sound? o kaya meron kang narinig na beep? kapag meron kang narinig na 1 long beep pki check ung memory mo. bka LOSE connection lng yan. tpos try to reset the BIOS setting. mikita yan sa loob ng motherboard. malapit sa CMOS battery.. meron jan na 3 pin na my numbr 1,2 and 3. tpos my mkikita kng mliit na item na kumakapit sa 1 and 2 ilagay mo xa sa 2 and 3 tpos mg hintay ka lng ng 7-10 seconds then ibalik mo xa sa 1 and 2.. tpos try mo paandarin.. ^^
Asus x553m won't power on
what is it, ?
2013 made, M means mobile
black screens , Asus logo dead, screen dead black ,BIOS dead. login dead, with power button held for 10 full seconds. ok?
sure it is dead are not all that old dead, for all this classic reasons due to ITS AGE.
1-the big huge battery is bad, remove it run on AC power pack only even forever. battery here can short and overload power.
2: coin cell battery inside dead, as all are this old. replace it.
7 year max and is close to end of life.
3; HDD dead, as most are this old (unless parked as a hanger queen unused for decade) we run smart tests on it.
4: CCFL lamps behind LCD DEAD> not your PCl. yours is LED good.,
so do the long reset first, big battery out , AC pulled
push power for 30 seconds, release
put back AC pack only , and see that BIOS works
report if the all BIOS hot keywork next with SCREENS BIOS all working, this is first step on all PC made this.
(not apple bs)
The bios most work even with HDD removed.
remove all USB toys first.
How do i remove the ram from asus zenbook
It it is located at the bottom of the device.. Flip over your Zenbook carefully, and on the bottom side there will be one or two small flap doors with a screw in it the memory is under one and the HDD Drive is under the other.. Be sure to shut down and take battery out before you change or take out memory or HDD Drive.. Hope this helps.. Ian.C
How to bypass a hard drive password on a asus eee pc
If u have an administrator password go to bios setup and change the user password and HDD password. otherwise the first option
1.click esc on the screen where the hdd password is asking, u get master password on the hdd manufacturer site.
2.Replace the Bios
May asus k555l have fps problem
When did you begin to notice that they had a problem?
what's going on?
Did you check the measurements of the FxS?
In case that is the problem I leave a video, try to change some values in the registry console so that the problem can be solved.
Not finding what you are looking for?