20 Most Recent Zanussi TC7102W Electric Dryer Questions & Answers

Making an electrical noise, but drum not turning. Sounds like it's shorting.

I'd suggest - remove the top cover. Switch on. Push the drum around - see if the drum picks up speed and continues to run. If this happens, it means that the motor Starter capacitor has gone dud and will need replacing. Note- If the drum doesn't continue to rotate after you shove it, switch off immediately. It will likely then be a faulty motor.

Read full answer

Zanussi TC7102W... • Answered on Aug 16, 2018

4 Answers

Hi i have a problem

Be the first to answer

Zanussi TC7102W... • Posted on Feb 15, 2018

0 Answers

Zanussi TC7102W, water leak near front right, have replaced ALL

Perhaps the tank itself is cracked?

Read full answer

Zanussi TC7102W... • Answered on Jan 10, 2018

1 Answer

My lg td-c70045e dryer causes a power surge throughout the whole

Dryer more than likely draws more current than other light duty appliances that are plugged in.

Read full answer

Zanussi TC7102W... • Answered on Nov 04, 2017

1 Answer

Squeak

Be the first to answer

Zanussi TC7102W... • Posted on Jun 29, 2017

0 Answers

Zanussi condenser dryer tc 481W. This is an older

Be the first to answer

Zanussi TC7102W... • Posted on Mar 25, 2017

0 Answers

Maytag dryer model mde9606ayw

Be the first to answer

Zanussi TC7102W... • Posted on Mar 20, 2017

0 Answers

Dryer does not dry clothes

If the dryer tumbles but does not warm up, you either have one or two blown thermal fuses, a burned out element if it’s electric, or a burned out igniter if it’s gas.

If one of the two thermal fuses are blown you will not get heat. Thermal fuses blow (and are not resetable, they must be replaced) when the machine gets too hot. Often this is caused by not enough air flow through the machine. Check and make sure your exhaust vent is not clogged. Clean it the best you can to get all the lint, dead mice, bird nests, etc. out. Also make sure air is blowing out of the machine when it is turned on. If not you have a blower problem.

The thermal fuses are located on the element casing. They each have two wires coming out of them. They are about 3/4 inch round with screw ears on the sides so they are about 1 1/2 inch long and about an inch across. With a multimeter, check the continuity across the terminals. If there is no continuity the fuse needs to be replaced.

To check the element(s), you can either visually look and see if it is broken or check the continuity with a multimeter. No continuity means the element is broken. Replace if necessary.

To check for a broken igniter, take out the old one and look at it. If it looks broken or very burned, replace it.

Read full answer

Zanussi TC7102W... • Answered on Jan 09, 2017

3 Answers

It is taking far too long to dry, this has only recently started? what could be the problem?

Dryer Taking Too Long To Dry Clothes - GE Appliances

products.geappliances.com/appliance/gea-support-search-content?...

To minimize the possibility of electric shock, unplug the dryer from the power supply ... When clothes are taking a long time to dry or do not seem to be drying, the ...Missing: zanussi ‎tc7102w ‎far

Dryer Troubleshooting: Takes Too Long to Dry - YouTube

? 2:13 https://www.youtube.com/watch?v=ql6_fRRc20c Dec 14, 2009 - Uploaded by ManageMyLife Here are common reasons why laundry can take longer to dry than normal. ... my dryer takes too long to dry. i have cleaned it, hose, lint screen, could this has anything to do with ... Dryer Troubleshooting - Not Drying or Taking a Long Time to Dry - Duration: 14:08. ... How Does an Electric Dryer Work?Missing: zanussi ‎tc7102w ‎far

Dryer Troubleshooting - Not Drying or Taking a Long Time ...

? 14:08 https://www.youtube.com/watch?v=xiqlFX0VRQo Jun 26, 2012 - Uploaded by Bill Newberry Why is my Dryer taking too long to dry. How to .... What type of connector shoul

Read full answer

Zanussi TC7102W... • Answered on Jan 21, 2016

1 Answer

Tripping electricity think it might be the bearing is worn

Hi , if its tripping electricty you must have a shorting wire either some water drop is leaking onto a live wire. The unit will have to be checked .

Read full answer

Zanussi TC7102W... • Answered on Jan 13, 2016

1 Answer

How to repair a zanussi condenser tumble dryer belt

Access from the rear panel to drive belt: - Remove the worktop - Remove the side panels - Remove the rear panel cover - Remove the rear panel - Remove the motor unit Dado

Read full answer

Zanussi TC7102W... • Answered on Oct 21, 2015

1 Answer

Zanussi Condenser Tumble Dryer

go to the zanussi web site you should be able to download a manual good luck

Read full answer

Zanussi TC7102W... • Answered on Mar 11, 2015

2 Answers

START BUTTON SWITCH REPLACEMENT FOR DRYER ZDE

-Why replace it...? Broken...? If so replace it. Good Luck mai

Read full answer

Zanussi TC7102W... • Answered on Nov 14, 2014

1 Answer

My dryer is just blowin cold air but its still spins can you help try and solve what the matter with it

Hi, the same thing happened to me and is quite an easy fix, 1 remove the plug from the wall socket. 2 Inside of the drum at 12 o clock (above the door on the inside) is a thermal cut out which has tripped due to overheating. 3 Remove two screws on the retaining clip and take the thermal cutout out. This should be self resetting but for some reason it has not reset (a continuity test with a multi-meter will prove this is the problem) 4 Give it a sharp tap on the bench and it will re-set ( if this sounds too extreme go out and buy a new one but trust me it will work)

Read full answer

Zanussi TC7102W... • Answered on Jun 25, 2014

1 Answer