20 Most Recent ASUS P4VP-MX Motherboard - Page 7 Questions & Answers

Go to here: http://support.asus.com/download/download.aspx?SLanguage=en-us

and get the manual and connection of your motherboard there.

Don't forget to rate my help
Thank you for using FIXYA!
Pablo :-)

é isso que você precisa?

I have the same problme i just formatted my computer and put windows xp on it. I have no ethernet card being roconized so ic annot go online to get the drivers.
MY motherboard disc:
A7N8X-X
Nvidia nForce2 Series Support CD Rev.108.01

i have search long and hard trying to find a image of the cd on the net with no luck. I need a file i can put on a usb stick and plug and run on my other pc.


thanks...

256 with 2.26ghz is not 100% possible

the memory is too low

Test to make sure the USB functions on PC ( plug a camrea or something else into it ) If the camera doesn't work either , then you need to get a PCI USB card . If the Pen drive shuts down on another computer then you need to dispose of the pen drive ( more than likely the pen drive is not working )

If I understand you right, your display is not coming on with your new hardware. Try the eliminaion process:

take out the new things. Install them one by one, and try booting each time you install one. If that passes, turn off and install the next one, until you isolate the one failing. Once you know it, installit properly or come back here for help.

It might be you do NOT have proper codec to play media files . If system boots up and you hear windows start then it not the asus motherboard drivers .

http://www.codecguide.com/

you might have loose connections in back check that out sometimes if not connected right or loose it wont produce the signal

Try to removed the memory and cleaned with pencil eraser the contacts and install it back.

You will need to install audio driver. Here is link.
You may need to download more drivers (eg. video, network etc.)
Here is Asus download page , if you have a P4VP-MX your MB is a socket478, just select right model.

regards

driver motherboard asus p5vp mx

try to clean your video card and ram using the eraser.

Yes,

Run windows updates, Start>programs>windows update
It will ask you if want to da an express or custom update, select custom.
On the left you will see optional hardware updates, select all and install.

Or you can go to start>settings>control panel>system>device manager> select your sound card and update driver via internet.

Hope this helps

So i guess your problem that its taking long time On POST before switch to windows.
best possibility can be the disk drive connections, after checking processor ram and stuff its searching for drivers if you have any conflict on drives such as master slave configuration it will take bit time. take a look at drive setting hope this will help you.

check for the cmos battery!! see if it still on 3 volts

Most likely it's the motherboard but to make sure. Ask your maintenance guy to plug in your CPU to a working motherboard... If your CPU fails, change it. Same with the board. Put the working CPU on your board. If the board fails, change the board.

Click the link below & download your manual. You'll have to fill in the three windows to get to your board.
Motherboard
Socket478
P4VP-MX Click search. Than open the + sign for manual.
http://support.asus.com/download/download.aspx?SLanguage=en-us
Go to Pg.1-22 section
11. System panel connector (10-1 pin Panel 1)
See the diagram at the top of the page.
You might need a flashlight if the board is in the case!
please vote...

you can download your driver here; http://support.asus.com/download/download.aspx?SLanguage=en-us

just input data needed.

epox-motherboard.

Model no. EP-4VKMI
Socket 478

this will suited to you processor.

http://support.asus.com/download/download.aspx?SLanguage=en-us