Top 20 Radio Shack Indoor/outdoor Wired Thermometer / Hygrometer. Bnip Questions & Answers

how do you adjust the weather forecaster 63-1090 clock

Radio Shack... | 1,134 views | 0 helpful votes

It is a wired system (outside unit to the indoor phone) and only available in South Africa. This seems to be the distributor and there is no manual online. The are far better systems with colour video, audio and wifi or bluetooth.


Measuring Tools... | 19 views | 0 helpful votes

ask your phone company

Measuring Tools... | 15 views | 0 helpful votes

It is a known issue

Try first a general reset:
- remove the batteries from the clock (thus turning it Off.)
- remove the batteries from the outside sensor (if you are not aware that it has batteries, then perhaps it is not working because the batteries are no good any more! check that also.)
- wait 10 minutes with no power to the device.
- put batteries back in, power On again.
- hit Reset.
- hit Receive button.
- change the channel for reception from the outside sensor.
- change the channel on the outside sensor to match that channel.
- then set the time once more, once the remote temperature is sensed once again.

If this does not get the outside temperature reading working again, you may have to replace that temperature sensor.


Measuring Tools... | 14 views | 0 helpful votes

Try removing all batteries, then reinstalling in the outdoor unit and waiting for it to start sending data before reinstalling batteries in the indoor unit. If you don't see data displayed on the indoor unit, the outdoor unit may have failed.

Measuring Tools... | 15 views | 0 helpful votes

Reset display by pressing the RESET button, located on the back of the display unit inside the battery compartment. Date and time will need to be entered after a reset. Flashing of the outdoor temperature is generally an indication of wireless interference.
Hard Reset:
  1. Bring both the sensor and display unit together and power down by removing at least one battery from each and/or removing the power cord.
  2. Make sure the A-B-C switch on both units matches. ...
  3. Reinstall the battery in the outdoor sensor.
  4. Reinstall batteries and/or power cord into the display unit

Measuring Tools... | 62 views | 0 helpful votes


Measuring Tools... | 106 views | 0 helpful votes

Measuring Tools... | 135 views | 0 helpful votes

Take it apart and get some isopropyl alcohol and a q-tip. check for corrosion around the terminals. If there is none, look for loose connections. If there is something loose, check if a bit of the board is loose. If a bit of the board is stuck to the terminals, give up on batteries.

Measuring Tools... | 121 views | 0 helpful votes

Those are precision devices and require factory check up and calibration at regular intervals. Contact your dealer.

Measuring Tools... | 166 views | 0 helpful votes

Give details about the clock. Is it mechanical or electronic?

Measuring Tools... | 133 views | 0 helpful votes

They are advertised as 50 foot range, but the accuracy starts falling off past about 35 feet

Measuring Tools... | 133 views | 0 helpful votes

Battery compartment contains reset button. Press. Will need to re-enter time and date.

Measuring Tools... | 130 views | 1 helpful votes

Not finding what you are looking for?
Radio Shack Indoor/outdoor Wired Thermometer / Hygrometer. Bnip Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Radio Shack Measuring Tools & Sensors Experts

Cindy Wells

Level 3 Expert

6222 Answers

Brad Brown

Level 3 Expert

18564 Answers


Level 3 Expert

6746 Answers

Are you a Radio Shack Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Radio Shack Measuring Tools & Sensors

  • Radio Shack Measuring Tools & Sensors

Most Popular Question

high temperature 101 9 not home

  • Measuring Tools & Sensors