Radio Shack Indoor Outdoor Thermometer 63-1024 No Reserve 1 Start White Color - Answered Questions & Fixed issues

1 Answer

My Radio Shack Weather Forecaster has this same

how do you adjust the weather forecaster 63-1090 clock

Radio Shack... | Answered on Dec 31, 2012 | 1,134 views

1 Answer

How to set radio shack weather forecaster to accurate time zone

http://support.radioshack.com/manuals/ome63-1085.pdf

Radio Shack... | Answered on Aug 06, 2013 | 393 views

1 Answer

Rardio shack cordless phone 430-5862

The manual is available here: http://phone.manualsonline.com/manuals/mfg/radio_shack/58_ghz_expandable_cordless_telephone_with_talking_caller_id_digital_answering_system.html . Click on the Get this Manual button.

I hope this helps.

Cindy Wells

Radio Shack... | Answered on Jun 27, 2011 | 121 views

1 Answer

MD-3006SS Metal Detector will not tune

I had the exact same problem and after messing around with it for about half an hour I realized that the cord was the problem, I was kind of moving it around while plugged in and if I hold the end of the cord in a certain direction it works like it should. If the results are the same for you, I suggest either getting a replacement cord or just do the not so reliable option and tape the cord into place.

Measuring Tools... | Answered Yesterday | 262 views

1 Answer

Code puk leica ts o6 plus num° de serie 1368778

ask your phone company

Measuring Tools... | Answered on Jan 13, 2021 | 14 views

1 Answer

Sokkia total station 610 Error 205 how to rapair

What is 'rapair'?

Measuring Tools... | Answered on Jan 13, 2021 | 13 views

1 Answer

Sharp Atomic Clock SPC-373. The outdoor sensor on Model spc373 not working

It is a known issue

Try first a general reset:
- remove the batteries from the clock (thus turning it Off.)
- remove the batteries from the outside sensor (if you are not aware that it has batteries, then perhaps it is not working because the batteries are no good any more! check that also.)
- wait 10 minutes with no power to the device.
- put batteries back in, power On again.
- hit Reset.
- hit Receive button.
- change the channel for reception from the outside sensor.
- change the channel on the outside sensor to match that channel.
- then set the time once more, once the remote temperature is sensed once again.

If this does not get the outside temperature reading working again, you may have to replace that temperature sensor.

https://www.google.com/search?q=Model+spc373

..

Measuring Tools... | Answered on Jan 02, 2021 | 14 views

1 Answer

How to connect indoor station with outdoor station audio door phone digitech bpsdp3206a

It is a wired system (outside unit to the indoor phone) and only available in South Africa. This seems to be the distributor and there is no manual online. The are far better systems with colour video, audio and wifi or bluetooth.

https://www.game.co.za/game-za/en/All-Game-Categories/DIY-%26-Auto/Home-Security/Intercoms-%26-Alarms/Alarms-%26-Sensors/Digitech-Wired-Door-Phone-BPSDP3206A/p/504101-EA

..

Measuring Tools... | Answered on Dec 30, 2020 | 19 views

1 Answer

My model 1099 stopped displaying despite battery changes for the indoor and outdoor sensors. How do I get it to display again. After all these years of satisfactory use.

Try removing all batteries, then reinstalling in the outdoor unit and waiting for it to start sending data before reinstalling batteries in the indoor unit. If you don't see data displayed on the indoor unit, the outdoor unit may have failed.

Measuring Tools... | Answered on Dec 24, 2020 | 15 views

1 Answer

Is there any way to change the battery on a Trumeter 5505E measuring whee

5505E MEASUREMETER BATTERY CHANGE (3V CR-2032)
REMOVE WHEEL AND SHAFT BY GENTLY PULLING AXLE OUT OF UNIT.
DRILL OUT 7 PLASTIC HEADS WITH 3/16 DRILL BIT. (ABOUT 1\8 DEPTH)
SPLIT TWO SIDES OF CASE AND REMOVE HANDLE.
SLIDE OUT CLEAR PLASTIC CONTROL UNIT. PUSH DOWN ON BUTTONS AS YOU REMOVE SO AS NOT TO DAMAGE THEM.
PUSH DOWN SLIGHTLY TOWARD THE CASE ON LOCK TABS WHILE GENTLY PULLING CASE APART. START ON ONE END AND WORK YOUR WAY TO OTHER END. KEEP GASKET INTACT. OPEN CASE.
THERE IS A "Y" SHAPED RETAINER HOLDING IN THE BATTERY. WITH NEEDLE NOSE PLIERS, CAREFULLY SLIGHTLY SQUEEZE THE BOTTOM OF THE "Y" AND PULL UP GENTLY. YOU CAN NOW REMOVE THE BATTERY AND INSTALL THE NEW ONE. PUSH RETAINER DOWN TO LOCK BACK IN.
MAKE SURE GASKET IS IN PLACE AND PUT CASE BACK TOGETHER, MAKING SURE WHEEL ADAPTER IS IN PROPER PLACE. TURN ON AND TEST CONTROL UNIT AND TURN WHEEL ADAPTER TO MAKE SURE UNIT IS WORKING PROPERLY.
SLIDE CONTROL UNIT BACK IN BEING CAREFUL OF THE BUTTONS. RE-ASSEMBLE HANDLE AND PUT THE TWO SIDES OF THE CASE TOGETHER. I USED THREE PIECES OF ELECTRICAL TAPE TO HOLD CASE TOGETHER. ONE ON THE TOP BETWEEN THE TWO HOLES, ONE ON THE BOTTOM JUST ABOVE THE DISPLAY, AND ONE IN THE MIDDLE.
PUT THE PLASTIC PIECE IN THE HOLE AND LINE UP. MAKE SURE BOTH O-RINGS ARE ON THE AXLE SHAFT. GENTLY INSERT AXLE ALL THE WAY IN WHILE ROTATING IF NECESSARY.
I WAS SO HAPPY I HAD IT ALL BACK TOGETHER AND WORKING, I HADN'T TAKEN ANY PICTURES AND I DIDN'T FEEL LIKE TAKING IT ALL APART AGAIN. MIGHT ADD PICTURES LATER IF NEEDED. I HAD BEEN LOOKING FOR YEARS ON HOW TO CHANGE THE BATTERY, AND I FINALLY MADE UP MY MIND THAT I WAS GOING TO DO IT.
JMS 10-20-2020

Measuring Tools... | Answered on Oct 21, 2020 | 596 views

3 Answers

Acr 2000 ac machine will not leave initializing

You can try the following: 1# Check the main power cable & make sure it has 110V (Do not run the machine with long extension cable).2# Check all harness connection.3# Check keyboard cable connection on back of control board.4# If all the cable connection is good then you may need to replace the control board.

Measuring Tools... | Answered on Aug 02, 2020 | 5,625 views

1 Answer

Hello , I have a problem with total station sokkia set 650rx . shows error E097 & E031. How to solve it . ans plz

Those are precision devices and require factory check up and calibration at regular intervals. Contact your dealer.

Measuring Tools... | Answered on Aug 01, 2020 | 160 views

2 Answers

Need a manual and battery type for Micronta Pocket Digital Multimeter, part 22-169

Please contact a radio shack for this info.

Measuring Tools... | Answered on Jul 07, 2020 | 1,740 views

2 Answers

Briggs and stratton OHV single cylinder engine (311777)... which valve is exhaust, top or bottom?

the one closest to the muffler.

Measuring Tools... | Answered on Jun 02, 2020 | 245 views

1 Answer

Hi where can I purchase outdoor sensor for Auriol IAN 37966 weather station Thanks Mal

From :
ebay.com
amazone.com

Measuring Tools... | Answered on May 18, 2020 | 65 views

1 Answer

Acurite I do not have an a b c sensor on my indoor units only outside so will no sync up

Reset display by pressing the RESET button, located on the back of the display unit inside the battery compartment. Date and time will need to be entered after a reset. Flashing of the outdoor temperature is generally an indication of wireless interference.
https://www.acurite.com/media/manuals/00754-instructions.pdf
Hard Reset:

Bring both the sensor and display unit together and power down by removing at least one battery from each and/or removing the power cord.
Make sure the A-B-C switch on both units matches. ...
Reinstall the battery in the outdoor sensor.
Reinstall batteries and/or power cord into the display unit

https://support.acurite.com/hc/en-us/articles/360013641694-3-in-1-Reset

Measuring Tools... | Answered on Apr 29, 2020 | 62 views

4 Answers

Which tool should I used at the time of moving?

You may use following removals Tools

Moving Dollies
Pallet jacks
Hand Trucks
Hydraulic Tools

You may also get information about Removals Tools Here
Removal Companies Tools

Measuring Tools... | Answered on Apr 24, 2020 | 177 views

1 Answer

Model 06004RM outside temperature stuck. Did a hard reset with fresh lithium batteries. Still not working. Really frustrated.

https://support.acurite.com/hc/en-us/articles/360007555574-Temperature-is-Flashing-Stuck-or-Showing-Dashes-on-a-Basic-Multi-Sensor-Display-

Measuring Tools... | Answered on Apr 22, 2020 | 134 views

1 Answer

My Maxkon N17014 WS-1081 weather station LCD will not work on battery power it's ok when connected to computer via USB

Take it apart and get some isopropyl alcohol and a q-tip. check for corrosion around the terminals. If there is none, look for loose connections. If there is something loose, check if a bit of the board is loose. If a bit of the board is stuck to the terminals, give up on batteries.

Measuring Tools... | Answered on Apr 22, 2020 | 121 views

2 Answers

Need a seal kit for a Culligan Mark 89

Your local Culligan dealer is the only place to get one. You need the retrofit kit to prevent the shaft of sealpack from bending.
RJ

Measuring Tools... | Answered on Mar 19, 2020 | 3,121 views

Not finding what you are looking for?

0 questions posted

Ask a Question

Usually answered in minutes!

Are you a Radio Shack Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Radio Shack Indoor Outdoor Thermometer 63-1024 No Reserve 1 Start White Color? Or just drag it here!

Radio Shack Indoor Outdoor Thermometer 63-1024 No Reserve 1 Start White Color - Answered Questions & Fixed issues

My Radio Shack Weather Forecaster has this same

How to set radio shack weather forecaster to accurate time zone

Rardio shack cordless phone 430-5862

MD-3006SS Metal Detector will not tune

Code puk leica ts o6 plus num° de serie 1368778

Sokkia total station 610 Error 205 how to rapair

Sharp Atomic Clock SPC-373. The outdoor sensor on Model spc373 not working

How to connect indoor station with outdoor station audio door phone digitech bpsdp3206a

My model 1099 stopped displaying despite battery changes for the indoor and outdoor sensors. How do I get it to display again. After all these years of satisfactory use.

Is there any way to change the battery on a Trumeter 5505E measuring whee

Acr 2000 ac machine will not leave initializing

Hello , I have a problem with total station sokkia set 650rx . shows error E097 & E031. How to solve it . ans plz

Need a manual and battery type for Micronta Pocket Digital Multimeter, part 22-169

Briggs and stratton OHV single cylinder engine (311777)... which valve is exhaust, top or bottom?

Hi where can I purchase outdoor sensor for Auriol IAN 37966 weather station Thanks Mal

Acurite I do not have an a b c sensor on my indoor units only outside so will no sync up

Which tool should I used at the time of moving?

Model 06004RM outside temperature stuck. Did a hard reset with fresh lithium batteries. Still not working. Really frustrated.

My Maxkon N17014 WS-1081 weather station LCD will not work on battery power it's ok when connected to computer via USB

Need a seal kit for a Culligan Mark 89

Not finding what you are looking for?

Ask a Question

Popular Products

Radio Shack IndoorOutdoor Thermometer with Hygrometer

Radio Shack Wireless IndoorOutdoor Thermometer System

Radio Shack Wireless Weather Forecaster

Radio Shack Extra Low Temperature Outdoor Weather...

Radio Shack Indoor/outdoor Wired Thermometer /...

Top Radio Shack Measuring Tools & Sensors Experts

Cindy Wells

Brad Brown

Harrie

Are you a Radio Shack Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Manuals & User Guides