20 Most Recent BenQ Joybook 5100U Notebook - Page 7 Questions & Answers

PLUG AND PLAY no driver needed. Terry

here's a code reference:

Go to company's website.

Check the signal cable connected in between monitor and system for firmness. Re-seat at both end once and check. If it does not help you, contact any service technician. Gopakumar Gopalan Google

If your LCD TV or monitor has stopped working, or is displaying one of the following symptoms, then it's a candidate for some new capacitors - Flickering screen - Screen image disappears after several seconds - Dim screen - Slow start - Power LED on, but no picture - Unusual colors and/or lines The primary cause of LCD TV and monitor failure is caused by faulty capacitors. You can examine the capacitors in your LCD TV or monitor and actually see if they are bad. If they appear bulged on top, then they need to be replaced. New capacitors will solve a host of problems in LCD monitors and TV's and will extend the life of your monitor or TV by several years. Take it to a repair shop.

When it have this kind of error is a problem of the powerboard. Anyway you must open it and look at the all capacitors and if are them inflated, if them are inflated must change them. But can be a problem with inverters... control the transistors - MOSFET on the powerboard. Good luck!

When it have this kind of error is a problem of the powerboard. Anyway you must open it and look at the all capacitors and if are them inflated, if them are inflated must change them. But can be a problem with inverters... control the transistors - MOSFET on the powerboard. Control the CCFL Lamps! Good luck!

It is a problem with the flat cables on your screen, you do't have other solution -> Change the display! Good luck!

Check the CCFL lamps!

When it have this kind of error is a problem of the powerboard. Anyway you must open it and look at the all capacitors and if are them inflated, if them are inflated must change them. But can be a problem with inverters... control the transistors - MOSFET on the powerboard. Good luck!

When it have this kind of error is a problem of the powerboard. Anyway you must open it and look at the all capacitors and if are them inflated, if them are inflated must change them. But can be a problem with inverters... control the transistors - MOSFET on the powerboard. Good luck!

It means some pieces are in short, try and verify all transistors are not in short after control all capacitors are not inflated. change all pieces transitors-mosfet / capacitors are in short.