Altec Lansing VS2121 Computer Speakers - Answered Questions & Fixed issues


I guess you have tried switching the speaks left to right to check its the speaker rather than the output to the speaker?

If you have it might be worth (If you are able to) opening up the speaker unit to check the wires are still attached and solid, maybe need a little re-solder is needed as the wires are usually very thin.

Altec Lansing... | Answered on Sep 19, 2014 | 283 views


well u could try a shop that sells music equipment they should be very common... but u need to know how to solder :D or at www.aswo.com i think they have cables....

Altec Lansing... | Answered on Jul 16, 2013 | 955 views


INTEX speaker set good aur best for all

Altec Lansing... | Answered on Apr 22, 2013 | 143 views


click start control panel sounds and audio devices you can adjust the volume there also select speaker volume you can change your settings there you can also tick in the box place icon in taskbar
hope this helps

Altec Lansing... | Answered on Jun 27, 2011 | 128 views


Hi, go to the Control Panel, Open it and select "Sound Manager" and choose "speaker option".
After that apply and ok.

Thanks

Altec Lansing... | Answered on May 13, 2011 | 74 views


you cannot order online??

Altec Lansing... | Answered on Mar 05, 2011 | 66 views


yes you need sound drivers
if your computer came with a motherboard disk the sound drivers could be on it
control panel sounds and audio,volume,advanced,speakers select appropriate speakers or
audio you will find 3 drop down lists make the necessary adjustments there or
control panel,administrive tools,computer management,device manager,sound video and game controllers could be a yellow question mark? right click to re-install drivers

have you tried this control panel sounds and audio,volume,advanced,speakers select the appropriate speakers from the drop down list

Altec Lansing... | Answered on Dec 20, 2010 | 73 views


First, I would verify that the speakers have power. If they do, I would then check to see if the cables are firmly seated and in the appropriate jack (ie. not the microphone). If all of that is OK, then I would see if the computers audio is on mute (if so the speaker icon in the lower right hand corner will have an "X" on it) as well as adjusting the volume knob on the speakers. If your computer has multiple audio devices, make sure the appropriate device is selected for playback. If all else fails, I would then try to unistall and reinstall the audio device driver within device manager.

Also, If possible, I would test the speaker system on another device (ie. portable stereo/cd player/MP3 player) to narrow down the root cause of the issue.

Altec Lansing... | Answered on Oct 28, 2010 | 55 views


buy your self a external sound card dude, the one on your laptop or pc is prob dead. problem solved..

Altec Lansing... | Answered on Sep 11, 2010 | 162 views


theres no on/off button for the subwoofer. once you plugged in the power cable,turn on the speaker system by turning the VOLUME knob on the right satellite until you hear a click sound.
An LED will light on the front of the right satellite when the power is ON. if you still dont hear any sound from the sub woofer then check to make sure that all cables are connected properly and are making a clear connection.

hope this help

Altec Lansing... | Answered on Sep 06, 2010 | 352 views


I have the speakers ( in perfect condition) but can not find the base unit. Do you want to sell your base unit ? Or do you want to buy the speakers ?

[email protected]

Altec Lansing... | Answered on Mar 05, 2011 | 372 views


If google and manufacturer website are of no help then ask a search agency like http://manualfox.com - They do a great job.
The service is not for free, but often worthy (you only pay if they find what you are asking for).

Altec Lansing... | Answered on Jun 18, 2010 | 387 views


If you have ATT cell service, this happens when phones get too close to electronic devices. Move the phone away from devices. And when/if you live near a local radio station, or their antenna....a good chance that electronic devices will act like antennas, thus picking up radio signals.

Altec Lansing... | Answered on Apr 01, 2010 | 96 views


Hi

Thank you for your query

Please try the following

1) Ensure your speakers are correctly plugged into the back of the PC they should be plugged into a light green port
2) ensure the volume control on the speakers are turning and you have set them to a decent level
3) Click on Start>Control Panel>sounds and audio devices and ensure the volume is up and the volume is not muted

Please try the above

If this has been useful please leave postive feedback/vote/testimonial - Thank You Again

Altec Lansing... | Answered on Feb 15, 2010 | 387 views


try to install your sound (audio) drivers and try to insert the pins in line in ports your work is done...

Altec Lansing... | Answered on Jan 20, 2010 | 69 views


Good day heigei, hi if you turn on the speakers but no ON lights came on, the problem is your Speakers' power supply stage, either a fuse opens (most likely) or something got burnt from the plug to the transformer, then to the rectifier diodes (got shorted then fuse opens) or to the regulator section. check also the power switch for poor contacts, of course you may need to open the speakers, If by any chance you hear something like hum.... check for open signal wire, check the IC amplifier also, a bad IC amplifier produce no sound or produce a loud humming/cracking sound. If you have no idea of what im talking about, have it checked by a technician. thats it.

Altec Lansing... | Answered on Jan 20, 2010 | 123 views


Hi , what could of happned is , as you pulled it out , it shorted or caused a power surge ,and blew a fuse of chip in the Speakers, If you still got a warranty Take it back to the shop and ask them to fix it , Do not tell them you pulled the cable out , otherwise they might not offer you your warranty.Hope this helps bud , happy new Year :)

Altec Lansing... | Answered on Jan 04, 2010 | 115 views


It's not your speakers that are the issue most likely (as long as they are round ends with sort of a point (not sharp just like a .5" length cylinder like .25" thick) instead of a rectangular USB connection. If you post more information about your computer we could probably direct you to the drivers you need to download in order to resolve the issue.

Altec Lansing... | Answered on Dec 21, 2009 | 108 views


Hello there
First things first
1) check cable for bad connectivity or dust. clean .
2) your board or volume control may be damage, or dust inside clean carefully ( if you can) with air spray for computers.
3) I hate to tell, .....change your speakers, may be is bad IC on board for speakers.
good luck

Altec Lansing... | Answered on Nov 13, 2009 | 297 views


las cornetas se escuchas muy bajos, porq no tengo los drives instalados

Altec Lansing... | Answered on Mar 16, 2009 | 578 views

Not finding what you are looking for?
Altec Lansing VS2121 Computer Speakers Logo

57 questions posted

Ask a Question

Usually answered in minutes!

Top Altec Lansing Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

76237 Answers

Sharps s

Level 2 Expert

43 Answers

Ekse

Level 3 Expert

13434 Answers

Are you an Altec Lansing Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...