20 Most Recent Canon LBP 1120 Laser Printer - Page 3 Questions & Answers

the driver herehttp://software.canon-europe.com/software/0037165.asp?model=and check the cable from the pc to the printer

Dear sir you may check print setup and options

you just select a4 or letter size from printer properties and print document

http://software.canon-europe.com/products/0000524.asp
from here download driver..

You can download the Canon printer drivers from theirsupport WEB site. Please click on this link and select your model printer todownload : - http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct

i want printer install

NO divers for 64-bit OS on the Canon site

Start - settings - printers - go to file menu - click server properties - create new form - named as Legal - width 8.50 Height 14.00 inches
left, right, top, bottom - give specification 0.20mm and go to canon printer icon - properties - select forms - click form 2 - change it to new form named as Legal - apply - and then OK - print a test page with the specifaction named as Legal

type into your search engine of choice, driver for LBP-1120 in 64 bit for Windows 7 you could be pleasantly surprised

If you are looking for the printer driver then - You can download the Canon printer drivers from their support WEB site. Please click on this link and select your model printer to download : - http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct

Could be the micro switch that the cover depresses when the cover is closed or the piece of plastic which is broken off the cover, this could be by hinge or fitted just inside the case, but is always activated cheaply by a bit of plastic pressing it. look for any broken bits or even take the main case off to find where it is. It could also be that your printer just needs a reset, try turning if off and disconnecting from your comp and power for a few mins then try it without connecting it to your computer doing a test page to see if you get the same problem. If the problem is solved and the printer works before you connect to the computer, then replace the driver you are using on your computer and try it again. You havent said how you are connecting to the computer so its just general information I can give you to check but I hope it helps.

The manual for the printer (downloadable from here) describes the process from pages 5-9 to 5-14

You should try this site for this LBP 3100 series to download drivers.