20 Most Recent
Canon imageRUNNER C3200 Color Printer - Page 6 Questions & Answers
Printing bleeds
This machine, like almost every other laser based device on the market does not print bleeds.
The spec for the image masking at the edge is probably in the 3 to 4 mm range. When the sales person tells you that you can do "full bleed" what they are saying (even if they do not realize it) is that you can print an image larger than 11x17 onto a 12x18 sheet of paper and then trim the page back to 11x17 so that the final product bleeds over the edge.
3/5/2008 3:24:38 AM •
Canon...
•
Answered
on Mar 05, 2008
Printing
There are 3 different locations where paper trays are selected.
1 is on the machine.
2 is in the print properties on the driver
3 is in Word itself, in differeing locations on the top tool bar depending on the version you are running.
I doubt you have to install anything, just one of those locations has your bypass selected. Maybe someone was running envelopes or labels and wound up selecting the bypass as the default tray in word, or again the driver properities.
This one is just searching through the driver and programs until you find the location that the bypass is selected as the default tray.
Just persistance, and yeah can be frustrating finding the exact location of the change.
2/22/2008 7:25:20 PM •
Canon...
•
Answered
on Feb 22, 2008
E000020-01b0
it could be that the ATR sensor is dirty. if you still have the old drum slide it back in to see the code goes away, if the copier comes ready run the full auto gradation.
1/6/2008 3:47:59 PM •
Canon...
•
Answered
on Jan 06, 2008
Scanning
you will need to download and install color network scangear.
http://www.usa.canon.com/html/download/canonnetutils.html
the document will show up as a image, and cannot be edited. you will set the document in the feeder,place it online and then pull it over from your pc. you need office xp or higher.
or you can by universal send and scan to email, scan to a flle. Both as pdf and jpeg/tiff . this will cost a lot more and may not be worth it with a older model. if you need more help installing scangear reply back
12/30/2007 8:22:21 PM •
Canon...
•
Answered
on Dec 30, 2007
Copy Problem
this could be two things first, the transfer belt is slipping. It can be cleaned on the inside of the belt and the rubber drive roller. second, the laser units need to be timed, its not hard to do but a service tech will need to do both. it should be running great. the 3200 is a great box
12/30/2007 8:03:58 PM •
Canon...
•
Answered
on Dec 30, 2007
Cannon Image Runner 3200
turn of the copier and hold down the 1 and 9 and turn the power back on. you shoule see a black screen with a little block in the upper corner. the blocks will fall to the bottom. when this is done cycle the power.it may take 30-60 minutes.
this is like a scandisk on a computer and will try to repair itself. If this does not work a service tech can try to format and reload sys software.
rep
12/28/2007 1:36:05 PM •
Canon...
•
Answered
on Dec 28, 2007
Canon IRc3200 pdf printing issue
base on my experience, that kind of problem occur when some programs on the driver was skipped during the installation. you can try to unstall the driver then reboot and then reinstall it again. this might solve your problem.
9/18/2007 8:54:36 PM •
Canon...
•
Answered
on Sep 18, 2007
Where's the meter?
Press the button marked [123] above the numeric keypad on the control panel for a list of machine meter readings.
9/13/2007 1:27:05 AM •
Canon...
•
Answered
on Sep 13, 2007
I have a problem with my canon printer g3411. It has an error P03 but no paper jam. How do I solve my problem
Error P03 on a Canon printer typically indicates a paper jam, even if you cannot physically see any jammed paper. Here are a few steps you can try to resolve the issue:
- Turn off the printer and unplug it from the power source.
- Carefully check the paper tray and inside the printer for any jammed paper or debris.
- Remove any jammed paper or debris you find.
- Plug the printer back in and turn it on.
- Attempt to print again.
If you don't see any paper jammed in the printer, there are a few other things you can try to resolve the error P03:
- Try resetting the printer. To do this, turn off the printer, unplug it from the power source, and wait for a few minutes before plugging it back in and turning it on.
- Check the ink cartridges and make sure they are properly seated and have enough ink.
- Clean the printer's rollers. Rollers are the small rubber wheels inside the printer that move the paper through the printer. Over time, dust, debris, or ink can build up on the rollers and cause paper jams. Cleaning the rollers can help resolve the issue.
- Try to update the firmware of the printer. Sometimes, a firmware update can resolve the issue.
- Check the printer's settings, ensure that the size of paper loaded match the size of paper set in the settings.
If the problem persists after trying these steps, you may want to contact Canon support for further assistance.
How to slove error e732-001 of canon ir 3225
The E732-001 error on a Canon iR 3225 indicates an issue with the fixing assembly temperature. Here are some steps to troubleshoot and resolve this error:
Reset the Condition:
Enter service mode by pressing the following sequence on the control panel: COPIER > FUNCTION > CLEAR > ERR.
This will reset the error condition. If the message disappears, your printer is ready to use. If this doesn't work, there may be a hardware problem as addressed below.
Replace the Main Thermistor:
The main thermistor is responsible for temperature sensing. If it's faulty, it can trigger the E732-001 error.
Consider replacing the main thermistor to resolve the issue.
Check the DC Controller PCB:
If the problem persists, inspect the DC controller PCB for any defects or malfunctions.
Replacing the DC controller PCB may be necessary.
Remember to turn off the printer before performing any maintenance tasks. If the error persists or if you need further assistance, I recommend contacting your local authorized Canon dealer or the Canon Customer Support Center for professional service
How to fix a problem with the laser unit
Fixing a problem with a laser unit depends on the specific issue you're facing. Here are general steps you can consider:1. **Inspect and Clean:** Examine the laser unit for any visible dust, debris, or obstructions. Use a can of compressed air to gently blow away any particles that might affect the laser's performance.2. **Check Connections:** Ensure all cables and connections related to the laser unit are secure. Loose connections can lead to malfunctions.3. **Calibration:** Some laser units may require calibration. Consult the device manual for instructions on how to perform calibration procedures. This often involves using specific calibration tools or software.4. **Replace Toner or Cartridge:** If print quality is an issue, consider replacing the toner cartridge. Low toner levels can affect the laser unit's performance.5. **Firmware Update:** Check if there are firmware updates available for the laser unit. Manufacturers may release updates to address performance issues or bugs.6. **Professional Service:**https://capcuttemp.net/rara-capcut-template/
I have a Canon MG7766 printer with error code B203. I noticed when I open the cover that the ink tank carriage is parked at the left side.
Canon Printer Error Code B203 Solution - ijstartcanon.ca
ijstartcanon.ca
https://ijstartcanon.ca > canon-printer-error-code-b203-...
Like many printer errors, this issue is related to a jam, but it is unlikely to be a paper jam. We have received data both offline and online, and many people ...
Missing: MG7766 ' Show results with:
MG7766
Solved: Canon Pixma MG7750 Showing Error Code B203
Canon Community
https://community.usa.canon.com > Canon-Pixma-MG7...
Apr 27, 2022 - I searched around and see other have suffered this fate, does anyone know what this error means and why the printer is failing, its hardly had any use, new ...
MG7720: Error B203 Suddenly occurs, on MULTIPLE pr...
Apr 27, 2021
PIXMA MG7720 Support Codes 1403 and B203
Mar 14, 2023
MG6821 Error Code B203 - Canon Community
Sep 3, 2020
PIXMA MG6620 Support Code B203 - Canon Community
Dec 12, 2023
More results from community.usa.canon.com
..
Not finding what you are looking for?