Canon MultiPASS MP360 All-In-One InkJet Printer - Answered Questions & Fixed issues

The message indicates that the printer door or the cover located on the top is not closed properly, so you need to re-open the door or the printer cover and close it accurately. GuruAid.com

Might need a new paper feed assembly. Give me a call. Damien, iPrint Technologies, 818.700.7419

Click the Menu button on the printer and scroll to the Network settings to the IP address. You may need to change the IP address to suit your network.

Most likely a worn roller or paper is feed incorrectly. Rollers are cheap online.

toner is damage please change the toner

I'd say maybe the switchs is broken and your machine reminds me of a lexmark fault. Look for the cover switch, under lid on base, at rear, small hole, find the switch that get's activated when openning and closing the top, maybe it is missing, or broken.

link to lexmark fault, that I think you will find your answer.

You need to save the scanned document as a jpg image file and then open an OCR program to convert this jpg file into a text file that you can open with WORD program.

Sounds like you may be low on ink. Have you tried to replace the cartridges? If this does not fix the issue please let me know and I will try and help.

Welcome to Fixya

Try to restart the print spooler service of windows XP. Click start menu then click run. Type in services.msc the press enter. Search and double click print spooler service then press stop tab. Wait for 5 secs then press start tab. Close everything down then restart the computer.

Thank you for using Fixya! If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

This means that your system does not display any printer name under the printer's list even though you would have installed your wireless printer on your Windows Vista system. This could be caused if you have not updated printer drivers in your system or the printer is incompatible with Windows Vista. Also see if the Windows firewall is blocking the printer from being recognized by your system.

Please get the driver here and re install it : www.nodevice.com/driver/company/Canon/Printer.html
www.canon-asia.com/
Regards, Jay

Please get it here : www.index-of-mp3.com/get-download-driver_printer_canon_pixma_ip_2770.html
www.opendrivers.com/categorycompany/13/129/printers-canon-free-driver-download.html

Hey there, You could go to your local electronics shop and they usually have the cords for some devices and usually have the ones that's similar to your device.
p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 13.0px Arial}

Thank you for using FixYa!

I hope that I helped you & that this post is helpful to you at most!

Don't forget to rate! :)

Hi!

Its the print head that causes the bad printing!The head is the holder that the cartridges clip into!You can replace it but it might be expensive but here is the part number:QY6-0047!

You can download the Canon printer drivers from theirsupport WEB site. Please click on this link and select your model printer todownload :- http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct

download from here, just select OS (vista or windows 7)

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/multipass_series/multipass_mp360#DriversAndSoftware

hope this help

Atrodo, kad pradin? pad?t? jutiklis yra suged?s arba Mylar juosta u? spausdinimo kaset? ve?imo yra ding?s ar sugadintas.
Nor?dami rasti Mylar gabalas ieškoti aiškiai 6mm x 460mm aiškiai gabalas plastiko su juodomis d?m?mis (lyg gradientas) abiej? sides.If manote, kad galite pabandyti ir j? atgal ieškote prat?stas kilpa ant abiej? pusi? stell spausdinti ve??jas.
Dauguma ?moni? skuba pakeisti rašalo tur?ti vertus paslysti ir ji tampa Poslinkis.

Try:

• How do I confirm the ink tanks are installed properly?
• How do I replace or insert an ink tank?
• What are the recommended ink tanks for this printer?
• What ink(s) / ink tank(s) does the printer use?
• What is the ink tank capacity?

If any more problem encounter,post or thumbs back.

use this link where you can get your drivers http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/multipass_series/multipass_mp360#DriversAndSoftware and select you operating system and download and double click on the downloaded file and give the instruction and then you can install your drivers correctly

download the drivers from here
http://canon.driversdown.com/Canon-driver-list/s_64_1.shtml

and install it, the last thing is plug in the printer