20 Most Recent
Canon BJC 85 InkJet Printer - Page 8 Questions & Answers
Canon B1. Inner finisher. Doesn't comes back to home at times. No Code.
If the inner finisher on your Canon IR-2535 doesn't return to the home position at times and there are no error codes displayed, there are a few potential causes and troubleshooting steps you can try:
- Check for any obstructions: The inner finisher may be blocked by a paper jam, debris or foreign objects. Check the finisher carefully and remove any obstructions.
- Check the finisher sensors: The finisher has sensors that detect the position of the finishing unit. If these sensors are dirty or blocked, they may not function correctly. Try cleaning the sensors with a dry cloth.
- Check the finisher motor: The inner finisher is powered by a motor that moves it into position. If the motor is not working correctly, it may cause the finisher to malfunction. You can try checking the motor and replacing it if necessary.
- Check the finisher control board: The finisher also has a control board that may malfunction and cause the finisher to stop working correctly. If none of the other troubleshooting steps work, you can try replacing the control board.
It is important to note that opening and working on the inner finisher can be dangerous, so if you are not experienced in working on office equipment, it may be best to call a professional for assistance.
Canon ir c3226i error code: e000202-00010
The E000202-00010 error code on your Canon IR C3226i typically indicates an issue with the Fixing Assembly Unit. You may need to replace the Fixing Assembly Unit in order to resolve this issue. Alternatively, if you are comfortable performing advanced troubleshooting with your machine, you can check the Fixing Relay PCB and check for any loose electrical connections.
Hello, as soon as i turn on my canon imagepress c1 photocopier, i have this error message E000073-0001 how to solve it . thanks
The E000073-0001 error code on the Canon ImagePRESS C1 photocopier is related to a problem with the temperature sensor in the fuser unit. Here are some steps you can take to try to resolve this issue:
- Turn off the copier and unplug it from the power source. Allow it to cool down for a few minutes.
- Check the fuser unit for any visible signs of damage, such as wear or burn marks.
- Check the temperature sensor and its wiring for any signs of damage, such as frayed wires or broken connections.
- Reconnect any loose or disconnected wiring and ensure that the fuser unit is properly seated and connected.
- Power on the copier and see if the error code has cleared. If it hasn't, you may need to replace the fuser unit or the temperature sensor.
If you are not comfortable performing these steps or if the error code persists after attempting to troubleshoot the issue, it is recommended that you contact a professional technician or service provider who is experienced in repairing Canon photocopiers. They will be able to diagnose and fix the problem.
Canon ir 4570 error code 744-3030 What Can I do
Error code 744-3030 on a Canon IR 4570 indicates a problem with the toner hopper. Here are some steps you can take to try to resolve the issue:
- Turn off the printer: Turn off the printer and unplug it from the power source. Wait for a few minutes and then plug it back in and turn it on.
- Check the toner: Open the toner hopper and check to make sure there is toner inside. If the toner is low, refill it.
- Check the toner hopper motor: The toner hopper motor may be malfunctioning, causing the error code. Check the motor to see if it is working properly. If it is not, it may need to be replaced.
- Check the toner hopper sensor: The toner hopper sensor may be dirty or malfunctioning, causing the error code. Clean the sensor and make sure it is working properly. If it is not, it may need to be replaced.
- Reset the printer: Reset the printer to clear any error codes. To do this, turn off the printer, press and hold the "1" and "9" buttons, and turn the printer back on. Release the buttons when the display shows "Initializing."
If the above steps do not resolve the issue, it may be necessary to contact a professional technician or Canon support for further assistance. They can help diagnose and fix the problem safely and effectively
Canon Imageprograf pro-2100 error EC1C-2036
It sounds like you may be experiencing a mechanical issue with the Canon Imageprograf Pro-2100. The error code EC1C-2036 is related to the lower drive nipe arm unit, which is responsible for moving the different components of the printer in order to produce prints. This error can be caused by foreign objects becoming stuck in the unit, or by the unit itself becoming worn out or damaged. To resolve the issue, you will need to first inspect the unit for any foreign objects, and if none are found, then you will need to replace the unit. If you are unable to locate the part or don't feel comfortable attempting a repair, then it is recommended that you contact a professional for assistance.
Iowa State canon TR 4520 I cannot get come on how can I fix it
The best way to reset your Canon printer is to find and hold the reset button on your printer. This usually consists of a small pinhole or recessed button located on the back or side of the printer, depending on the model. Press and hold the button for a few seconds until the printer resets itself.
Canon advance 4235 ir error code E000602-0101 problem
I'am making over $15k a month working online. I kept seeing how some people are able to earn a lot of money online, so I decided to look into it. I had luck to stumble upon something that totally changed my life. After 2 months of searching, last month I received a paycheck for $15376 for just working on the laptop for a few hours weekly. I was amazed how easy it was after I tried the copy below web...
www.join.hiring9.com
Not finding what you are looking for?