20 Most Recent Canon imagePROGRAF W8400 InkJet Printer - Page 4 Questions & Answers

replace the cartridge wich sits just below the control panel. it just opens up and then pulls out.

it's a problem that the sensors can read adn adjust the print head.
1.st print a nozzle check to see if the print head is OK
2.nd check if the paper is suitable for this kind of printer,sometimes it's not enough to use pigment materials but the correct materials.
3.rd clean carefully the sensor that reads the print-out
try and let us know the results

Reactions like this are usually because the printer is set to a different port than what your software is spooling to. Especially if the connection is via USB and in Vista.

The fix for this issue is to put the W8400 in service mode

Procedure to enter Service Mode Canon ImagePROGRAF W8400

1. Turn power off
   
2. Hold paper feed button and info button while powering on
3. Release at initializing screen

Once in service mode, perform a printhead reset

After this is done, you're good to go!

If it's not in your manual go to canonusa.com and look up support for your model printer. Canon has excellent email tech support.

eplace ink tank with correct 1. trust me. i work for the company

Visit Canon Support for imagePROGRAF iPF670 ' Canon U.S.A., Inc. and download user guide then troubleshooting section.

hi find link for https://www.helpowl.com/q/Canon/iPF750/Technical-Support/reset-error-code-canon-ipf750/673834

error 03800500-2f41 ipf 750model

Hardware error. 03130031-2618 Turn off printer, wait, then turn on again. 03130031-2618 VH voltage error Check the power supply unit.

yes! go o google an type the code it will help you figger out what to do