20 Most Recent Canon imageCLASS D780 All-In-One Laser Printer - Page 5 Questions & Answers

https://translate.google.com Hindi I have Canon 3530, in that E000000-0001 this error is coming, what to do

that error indicates a malfunction in the developing unit, probably a toner sensor is defective

that is a complicated procedure, search for the service manual but if you dont have experience better get technical support

Hi, probably a firmware malfunction or hard drive is defective

there is dirty selenoid of paperbang, change the foam on selenoid with seal tape. and blow with air for clean dust of toner.

there is dirty selenoid of paperbang, change the foam on selenoid with seal tape.

This error is related to the fixing film engagement/disengagement, the black gear on the end which is also a sensor flag sometimes break, this usually requires a complete new fixing unit

hi, taht is a sowteare malfunction, in some cases reinstalling the firmware solve the problem, but it could be the image processor pcb ( Main electronic board) defective and need to be replaced

E301A failure in the exposure control of the scanning lamp. try to remove - clean up - replace, I did it

Hi. That error indicates there is a problem with the counter board . Maybe is defective

Code E100-0001 Description Error detection on any of scanner motor, laser unit, and BD detection at scanner area. Remedy When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Replace the Laser Scanner Unit. (2) Replace the Engine Controller Board.

Download translation app on phone....might be easier than reset. I’m happy to assist further over the phone at https://www.6ya.com/expert/jonathan_3df355d7e608e0b0

Hello, Here is website to download you a manual. http://support-sg.canon-asia.com/contents/SG/EN/0300179301.html

Hello, Here is website to download the manual. Canon imageCLASS D480 Manual

Hello, here is website for operators manual for your printer. Canon imageCLASS MF4150 Manual