Top 20 Canon imageCLASS D880 All-In-One Laser Printer Questions & Answers

CLEAN THE FEED RUBBER OF YOUR ADF, OR THE SENSOR. OR REPROGRAM ADF

TRY TO RESET AND REPROGRAM THE ADF OR CLEAN THE FEED RUBBER

THE PAPER SELECT ARE NOT COMPATABLE, SELECT LGL IS EQUAL TO 8.5/14 FLSC IS EQUAL TO 8.5 /13. TRY TO SELECT BLACK COLOR OR CLEAN YOUR DEVELOPING UNIT.

What you are referring to is the transfer roller. More than likely you will need to replace that item. Try BEST Office Products .

There maybe an adjustment on the rollers for different types of paper grades. If so adjust it for heavier paper weight.

try http://.www.manualowl.com

Hello,

Unfortunetaly, there is no solution for your problem, Canon did not made drivers for 64-bit OS's.

Alterantively

You can try download Windows XP mod for WIndows 7 or any other virtualization software, and try to install drivers on the virtual PC.
This should work for you.

install the printer drivers first restart your computer then plug the usb into the printer for the "first time' you might plug it into the usb ports at the back of your computerhope this helps you

go to service mode. by pressing addtional function and # then go in clear and memory. after then restart machine.

you need to Fix heater assy. low temperature. You need to replace the assy.

This error message is displayed by the printer when paper is jammed in one or more locations. In such a case, users are recommended to remove the jammed paper from the specified location. The entire paper path must be checked for any pieces of paper. To stop the message, open and close the top most cover of the printer. Lastly, verify the flags and the sensors. If the problem persists, the cause of the error message could be a broken sensor or sensor lever.

Hey!!I know that u can get a 32bit driver Sorry!!

You can download the software here by selecting the system you are running:

http://www.usa.canon.com/cusa/support/consumer/copiers_fax/multifunction_copiers/imageclass_d880#DriversAndSoftware

Good luck.

Log onto there site to upload the program disk.Other wise u need another program disk and printer.

Repair men.

Bernie

there is a windows vista 32 bit driver that should work fine with it at cannon webs site

http://canon.driversdown.com/Canon-driver-list/s_475_1.shtml

hi, i am glad to see you have done the normal checks with the volt meter, but there is an internal fuse for these, you will have to gain access to the power supply inside, on or around the power supply should be either a 3 or 5 amp clear fuse, these are not your normal type fuses like you get in the plug, but these are slightly longer and clear glass........do not except this answer yet please, no thumbs up till you fix the problem, then can you thumbs up and accept the answer thanks...............

open google home page search driver magician

insatl update
all drivers
serch driver version size relaze dete