20 Most Recent Canon CanoScan 3000ex Flatbed Scanner - Page 5 Questions & Answers

You can download the Canon scanner drivers from their supportWEB site. Please click on this link and select your model printer to download :-http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct

Canon CanoScan... | Answered on Dec 19, 2011


Quoting from another model at link above:

DescriptionPrint faxes received in memory when the paper size loaded in the machine does not match the PAGE SIZE menu. You must press to clear the error then print the fax from memory.
SolutionMemory ReferencePrint faxes received from memory when the paper size in the machine does match the PAGE menu. You must correct the paper size discrepancy, press to clear the error and then print the fax from memory.Check / Change Paper Size:
Confirm what size paper is loaded in the rear tray (A).

The above illustration shows a PIXMA MX310
If the paper size loaded in the rear tray is not what you would like to be loaded, verify the paper size you want and then install it.In FAX mode, the machine will only support three paper sizes, 8.5"x11" (letter); 8.5"x14" (legal) or A4.Press to clear the error and return to standby mode.Press the button.Press the button.
PAGE SIZE screen will appear.
Use to select the paper size that matches the size loaded in the rear tray.
The choices are 8.5"x11" (letter); 8.5"x14" (legal) or A4.Press the twice.Click here to print the fax from memory.Print From Memory:
Press . to select to print all pages of the document.Press .
To print another document, return to step 6To finish printing, go to step 10.The screen will return to standby mode, if it does not, press .

Lengthy discussion:


Canon Office... | Answered 3 hours ago

So obvious, Probably the tonner issue, firstly make sure tonner properly filled and if it's still not working adjust the toner density from the Printer settings. You can check the cannon website too for deep down solutions

Canon Office... | Answered 6 hours ago

i can't turn on my canon ip2770 after resetting it.

Canon Office... | Answered Yesterday

Hi. you need to enter in service mode
with the machine turned on, in the control panel do the next key secuence:
press adittional function
press 2
press 8
press again adittional function.
service mode should appear in the screen: (#SSW)
tap in the arrow ? or ? and search for CLEAR
press OK once, with arrows search for ENGINE and press Ok once, with arrows search for ERRCLR and press OK once more.
turn off the machine from the main switch for about a minute and restart it. try to make some copies, if problem persist there is a malfunction in the fixing unit, get technical support.
if this answer was helpfull , please rate it. thanks

Canon Office... | Answered 2 days ago

The paper feed tray may be blocked. Something is covering the tray such as a large document.

If this happens, remove anything blocking or covering the tray. Turn the printer OFF, the ON and restart your print job.
*Hold large documents away from the tray while printing.

Canon Office... | Answered on Feb 11, 2020

Solution 1: Replace the Waste Ink Absorber
Step 1: Press the Power Button
* With the Canon Printer Powered off but connected to a power source. Press the "Power" button while pressing and holding the "stop/reset" button.
Step 2: Press the Stop/Reset Button
*When the Power is lit, press the "Stop/Reset" button two times
*While pressing and holding the "Power" button
Step 3: Move Into a Service Mode
*When releasing the "Power" button and the "Stop/Reset" button (regardless of order), the printer will move into a service mode. (waiting for menu selection)
Step 4: Press "Stop/Reset" Button
*When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the function listed in the table below.
(Each time the "stop/reset" button is pressed, the LED lights alternately in orange and green, starting with orange)
Note: Make sure there is need to press 4 times for waste ink counter reset
The number of the Reset button pressing LED Function Remarks
*0 time Green Power off
*1 time Orange Service pattern print
*2 times Green EEPROM print
*3 times Orange EEPROM reset
*4 times Green Waste Ink counter reset

Step 5: Turn on Canon Printer
Turn off the printer, then turn it on again.

Now Check the Canon printer error code 5800 is resolved. If not, then go to the next solution.

Solution 2: Enter Canon Printer in Service Mode, works best for multifunctional printers.

Step 1: Turn Off Canon Printer
Step 2: Go to Press the Menu Option
Step 3: Put Printer in Service Mode
*To do this you will have to press the "SCAN", "COPY" and "SCAN" buttons in that exact order.
Step 4: Reach to the "Counter Access" option
Step 5: Check amount of pages that you are printed
Press the "ok" key
Step 6: Press the "COPY" Button
Step 7: Score all the way to zero
Step 8: Stop once get "Scan Page Count" Option
Step 9: Set Score back to zero
Step 10: Press the "STOP/Reset" button
Step 11: Turn Off "Stop/Reset" button
Step 12: Disconnect the Power Cables and reconnect

Canon Office... | Answered on Feb 11, 2020

You can encounter this problem if your printer's Waste Ink Absorber gets full. Of due to some internal glitch present in your system.
Method 1:
Step 1: Choose the "Region" Option
Step 2: Set Options: Hit Set Printer prints One Sheet
Step 3: Set The Printer From One Sheet To Another
Step4: Tap On The "EEPROM" Option
Step 5: Use the Service Tool
Step 6: Perform A "Test" Print

Method 2:
  1. At first, unplug the power cable of the canon printer which you want to reset. In that case, you have to remove all wires and cables including the USB to the PC.
  2. After this process, try to press and hold the Start button and plugin your printer once again.
  3. While holding the " Start" button, tap on the " Resume" button twice.
  4. Now, you have to perform the first and second step once again.
  5. Once done, you have to press and hold the "Resume " button for 4 times. In this case, if you have to notice that, the light will only blink at the first two times.
  6. Once done, try to check whether you become successful to resolve the matter or not.

Canon Office... | Answered on Feb 11, 2020

Unfortunately, the printer is not compatible with Win 7 64. Canon has no plans for development of a Win 7 64 printer driver. Bad news for a lot of users.

Canon Office... | Answered on Feb 10, 2020

1. Perform a Power Cycle

The easiest fix for this error is to perform a power cycle. Doing so will flush out any broken configuration and forces the printer to add a new configuration. Here is how to do it.
  1. Unplug your Printers power cord as well as the USB cable that is connected to your PC.
  2. Keep the printer powered off for at least 3 minutes. After three minutes, plug the power cord and USB cable back and turn it on.
Check for any improvements after the printer restarts. If not, continue the troubleshooting steps.
  1. Power off the printer again.
  2. Open the printer's lid for the scanner. Turn on the printer again keeping the lid open.
  3. Close the lid after the printer restarts. Check for any improvements.

2. Check the Cartridge

Since the error 5011 mostly appears if the printer cartridge is stuck, it is recommended to check for the same.
Turn off your printer and check if a piece of paper or something else is stuck in the printer jamming the cartridge. Even a small object can cause this error. So, analyze the printer thoroughly.

3. Remove and Reinsert the Cartridge

If you haven't tried this already, try to remove and carefully reinsert the cartridge.
You can also try to clean up all the encoder strip found behind the printer. Reinsert the Cartridge after cleaning the encoder and checking for any objects stuck inside the printer.
Turn the printer on and see if the error is resolved. If the issue persists, you may need to take the printer to an authorized service center to get it fixed. Load comments

Canon Office... | Answered on Feb 08, 2020

Not finding what you are looking for?
Canon CanoScan 3000ex Flatbed Scanner Logo

63 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2279 Answers


Level 3 Expert

13434 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

CanoScan Canon

  • CanoScan Canon

Most Popular Question

plese im not driver canoscan 3000

  • Office Equipment & Supplies