20 Most Recent Zanussi ZBF360 Electric Single Oven - Page 7 Questions & Answers

Dear Shaun, Try to find the circuit breaker for the oven and see if it "popped". God bless your efforts.

Claire. Have you checked the cooker supply switch? (Usually on the wall near the cooker) If it has a neon light is this on? If not or no neon check the circuit fuse/mcb in the fuseboard. Allan Pointer.

Hey Allan
They are often controlled by a thermostat that will shut the fan off when things cool down. It is a safety measure.

On my Zanussi Grill element there is a clip on very slim "bracket" which has a place for the Thermometer tube to clip in. The bracket is right where the terminals go through the rear of the oven. Does this help?

Is your oven on a seperate fuse from the power points and light switches

the net will not display any information on your request so you have an option of a phone call to head office +39 0434 380 1 to get a retailer /spares agent if you go zanussiprofessional.com there is a contact us section for e-mail contact in which case you can fill out your details and ask where such a shop may be found in South Africa it appears that zansussi is part of the electrolux chain so you may get assistance from an electrolux spares shop one number that shows up 08445 613 613 which is ahead office number thee appears to be a lot of agents in the UK so you may have tp buy on line

Thank God that the clock works!

The child safety function In order to avoid that children engage oven, it is possible to lock the oven controls. Press the two keys (as shown) and hold them for at least 3 seconds. The beep and "SAFE" on the display indicates that the child safety function is activated and it is not possible to select the temperature or a function of the oven. To unlock the oven press the two keys (as shown) and hold them for at least 3 seconds. You will heard beep and indication "SAFE" will be disappear. Now you can operate the oven. Dado

Dado

I think yes, because spare part number 311407328/5 of outer glass door is the same for both oven. Dado

The gas valve for the lower oven won't open after the igniter starts glowing. If there is no orange glow from the igniter, then it needs to be replaced.

I searched "zanussi zou370 installation" and got several hits. Suggest you try the same.

1.Aclicking sound could be something wrong with a relay. Check for any loose connections around the main control board on your oven. The click you hear is a relay losing power and switching back on. If the clock resets then something is causing power interruptions to the board. 2. 3.Even a bad relay door switch will hinder your oven from operating. If your oven has internal fuses, a wiring or component problem could have caused a fuse to blow. A blown fuse is an indication that a component has shorted or failed, and the problem will need to be corrected. Most ovens that use fuses will have an indication of the circuits that are affected by a particular fuse. If an oven fuse has blown, then you should inspect the oven element and the associated wiring to determine the cause before replacing the fuse. THINGS TO CHECK: the broil element is the heating element that is found at the top of the oven and produces a very high heat for broiling. If the broil element isn't working, you should first do a visual inspection for signs that the element has blistered or separated. If the element appears normal then you can check for continuity with a multi-meter. Remove power from the appliance before performing this test. Remove the back panel and locate the terminals for the broil element and inspect the terminals and wires for signs of overheating or damage. If there is no continuity then the element will need to be replaced. If the wires are damaged then they will need to be repaired. If the element is ok then you will need to check the broil circuit to determine the cause. This involves live voltage checks and should only be performed by qualified persons. Components to check include fuses, if the range is equipped, and oven control thermostat or electronic control. Depending on the manufacturer of the element, you will normally read between 19 ohms and 115 ohms The bake element is the heating element that is found at the bottom of the oven. Most electric ovens use both the bake element and the broil element in a bake cycle, with the bake element performing 90% of the heating. If the bake element isn't working, the oven may not heat. To help determine if the bake element is defective you should first do a visual check. If the element is blistered or separated then it should be replaced. If the element appears to look normal, then turn the oven on to a bake function for a minute and then turn it off. Check the element for signs of heating and if it is still cold then it may be defective. Disconnect the power and then remove the back panel. First check the wires as they may have become loose or corroded. If the element appears to be fine visually, test it for continuity with a multi-meter. ( by placing the each of the meter prongs on each end of the heater element connectors) If the element is burned or no longer has continuity, it will need to be replaced. Depending on the manufacturer of the element, you will normally read between 19 ohms and 115 ohms The oven safety valve (also called the gas valve) is the part that ensures that gas is not released until the igniter has reached the correct temperature needed to ignite the gas. While this part can fail, it is uncommon. If the hot surface igniter does not glow you should first verify that you have voltage to the circuit. This is a live voltage check and should be performed by a qualified person. If voltage is lost at the valve terminals then you should verify the continuity of the bi-metal in the valve using a multi-meter.