20 Most Recent Yamaha Ef600 Generator/inverter Repair/service Manual - Page 9 Questions & Answers

You will need to know the BTU value of each type of fuel to compare the difference of each to one another. Nito methane is not a fuel as such, it does bring extra oxygen into the mix.

Yamaha... | Answered on Aug 07, 2009

Check your air filter, and the oil level.
Make sure you're running on a flat surface.
You may also want to clean the carb and all the carb jets with spray carb cleaner, and check the gas filter screen at the tank exit.

Yamaha... | Answered on Jul 08, 2009

Tom...what can I say - what you did was not very smart. Next time draw a diagram BEFORE you take the wires off!

Yamaha... | Answered on Jun 11, 2009

My answer:

Hello Bill:

Here are the site links you'll need to check and/or get info, or buy your adapter kit for your Yami YG4600D Genset conversion kit.

Most likely it's running an 8 or 10HP engine on it now? In any case it's most likely less then 12HP. Not sure what size engine you have, as you didn't say only for the model #? On older Gensets it's harder to track down the HP rated engine is all.

For your Yami YG4600D Genset there you most likely will have your choice of at least 4 adapter kits depending on if you are going to keep gasoline as an option. If you're definitely NOT going to be ever running gasoline again then there are 1 or 2 adapter kits to choose from.

Use the site links below, and then browse whichever area you want as there are many options there. The last link listed takes you through all the different engines by make & model #'s.

I would also shop around locally where you are in LA, as you might be able to get that adapter kit for a lot less then the $227 to $267 they are asking for there at that site.

If you don't see your exact model # (or kit) there call them on their 800 toll free # listed at their site.

Also - if this site doesn't meet your expectations customer service wise at least you will have a starting off point with the wealth of information supplied there!


"What Kit Do I Need?"


"Simple Explanation"


A and C Kit List
Please post me a reply as to this info helping you solve your adapter kit problem there by following my posting recommendations above. Also please rate my troubleshooting fix as well.

Keep me posted and I'll follow up as well.

Best regards,


Yamaha... | Answered on Sep 07, 2008

It could be a problem with the fuse and the circuit for the bathroom that is causing this issue to be occurring and a problem with the electricity wires and supply too and needs to be looked and inspected by an electrician to see why this is happening.

Electrical... | Answered on Nov 21, 2020

Better get someone who knows electricity. GFCI OUTLETS always need 3 wires or they will not protect. This is not time to learn about electricity from internet. Wrong connection and someone life may be in danger.

Electrical... | Answered on Nov 18, 2020

make model killowatt output?? portable or standby???

Electrical... | Answered on Nov 16, 2020

Here you go

Under the sink you tighten the nut. And if you haven't yet go ahead and insert the hose.

How to install a Garbage Disposal Button - InSinkErator ...

Electrical... | Answered on Nov 14, 2020

Take the plug out and go to Home Depot. Buffalo Tools makes that unit and Home Depot is a seller

Electrical... | Answered on Nov 14, 2020

Lots by the looks of it

Get Portable Generator Repair - Ansonia - JensonBrothers.com Ad·www.jensonbrothers.com/
Get portable generator repair in Ansonia and surrounding areas. We look forward to serving all your needs. Contact us now for fast service. Get A Quote. Professional Services. Fast Response Times.

Portable & Standby Generator Repair Company ' CT ...

www.ctgeneratorservice.com > Services
Oct 21, 2020 - CT Generator Service Repairs and Services Major Generator Brands, Like ... Propane Powered Generators; Natural Gas Powered Generators ... Missing: Ansonia ‎' Must include: Ansonia

CT Home Generator Repairs Connecticut

newingtonelectric.com > generators
Portable Generator Sales and Service CT The next time you lose ... The automatic standby units are available in natural gas or propane. The portables are ...

Portable conversions - O.J. Mann Electrical Services & O.J. ...

www.ojmannelectric.com > portable-conversions
Convert your gasoline portable generator to run on propane or natural gas. ... Pricing is for customer drop off of generator at our service department with later ...

Why Choose Us? - Connecticut Home Generator Systems

cthomegeneratorsystems.com > choose
Runs on natural gas and propane. Portable ... Portable generators are what most CT residents buy due to the efficiency and price. ... Get in touch with reliable Generac authorized sales and service generator Company and keep their phone number handy in case of ... Proudly serving areas throughout Connecticut including:

Electrical... | Answered on Nov 10, 2020

Take the effects loop jack, its 3 wires, and small white female connector out if the back of the amp, install it in the front, might need to cut the black wire farthest from the red wire for ground, and plug connector into white 4 pin box right next to input jack so that the red wire is closest to input jack. You only need 2 of the 4 pins to make circuit, 1st and 2nd closest to input jack. Might need to tweak the wire configuration in the white connector a bit but it worked for me, and without loosing built-in effects.

Electrical... | Answered on Nov 06, 2020

Contact Steel Craft directly to inquire. Be sure to identify model.

Electrical... | Answered on Nov 02, 2020

You omitted to say whether your "mains" is supplied by inverter, generator or mains hook up?

If there is no power at the outlet(s) and the breakers are ok then either there is a break in the wiring or no power is being supplied to the breaker box.

I suggest you check your supply and if ok, check the wiring to the breakers and outlets for continuity...

Electrical... | Answered on Oct 31, 2020

In the states, a portable generator that supplies ONLY equipment mounted on the generator and/or cord and plug-connected equipment THROUGH RECEPTACLES MOUNTED ON THE GENERATOR do not require bonding to a grounding electrode.

Electrical... | Answered on Oct 20, 2020

Clean or change air filter

Electrical... | Answered on Oct 15, 2020

Check that debris has not jammed the impeller. Small stone or piece of wood or wire, even a thick layer of sediment can prevent the impeller from spinning.

Electrical... | Answered on Oct 11, 2020

Not finding what you are looking for?
Yamaha Ef600 Generator/inverter Repair/service Manual Logo

11 questions posted

Ask a Question

Usually answered in minutes!

Top Yamaha Electrical Supplies Experts

Sheldon Dedek

Level 3 Expert

912 Answers

Robert Wooley
Robert Wooley

Level 2 Expert

178 Answers

Dan Horsefield
Dan Horsefield

Level 2 Expert

287 Answers

Are you a Yamaha Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Yamaha Electrical Supplies

  • Yamaha Electrical Supplies

Most Popular Question

yamaha ef600

  • Electrical Supplies