Top 20 Amerock Wood Finishes Knob; Stained, Maple, 1-1/4 Diameter Questions & Answers

0helpful
1answer

Deadbolt striker is a little too long. Can it be adjusted?

Have you tried calling AmerlockForLess.com for assistance? On their website they say: "American customer service reps by phone from 8:30 to 5:00 M-F. Our toll free number is 1-877-261-5805."
4/7/2018 8:27:02 PM • Amerock Hardware... • 87 views • 0 helpful votes
0helpful
1answer

How do I reverse a door handle on a hollow core door so the latch will close from the inside instead of the outside?

Most of the time all you need to do is swap the two handles and flip the latch over so the angled part of the latch is on the other side, so it will self latch when you close the door.
3/1/2015 8:12:10 PM • Amerock Hardware... • 1,088 views • 0 helpful votes
0helpful
2answers

How to open locked security toilet loock from outside

Look for a small hole or slot on or around the handle, Push a pin inside to unlock it.
7/24/2014 10:10:20 AM • Amerock Hardware... • 295 views • 0 helpful votes
0helpful
1answer

5 inches into mm

25.4 x 5
8/4/2014 3:12:39 PM • Amerock Hardware... • 61 views • 0 helpful votes
0helpful
1answer

STRIPED SCREWS IN DOOR TRYING TO REMOVE TO CHANGE LOICKS

You will have to carefully drill them out. Start with a small bit and slowly work up to a bigger one as you go once most of the head is drilled out the latch should pull off, you can then use vice grips to unscrew the remaing part of the screws.
4/6/2014 3:43:59 PM • Amerock Hardware... • 102 views • 0 helpful votes
0helpful
1answer

Broken key in dead bolt

If you can take the lock off the door push a small metal piece inside the lock from the back to push out the broken key. If unable to take it off, get an old windshield wiper, remove the stainless steel supports from the wiper (long skinny piece of metalt holding rubber blades in place). Grind or file an angled tooth into the end of one. Insert into lock (tooth down) so it catches on the teeht of ghe broken key, pull rod and key out.
3/17/2014 11:38:07 AM • Amerock Hardware... • 154 views • 0 helpful votes
0helpful
1answer

Door handle with loose play

Remove lock from door.The round part contacting door usually spins to accommodate different width doors. This will pull the assembly together.
3/10/2014 12:53:07 AM • Amerock Hardware... • 139 views • 0 helpful votes
1helpful
1answer

How can I clean/polish copper cabinet hardware

If you want to clean or polish your copper cabinet hardware, there are few way to go, like cabinet hardware (Knobs & Pulls) which you believe are copper it's really zinc casting with copper plated.on which is applied a thin coat of polish to prevent oxidation, and that plate about two atoms wide and any sort of a harsh or chemical clean on it will wipe out it. The finest thing you can follow is to take a jewelry polishing rag and go over the Cabinet hardware a bit. However, I don't see that it is offensive to have a copper pull that has turned color and has a "patina" on it. That is sometimes viewed as beneficial in decorating. The zinc pulls with copper plating are made so after few years replaced with new pulls.
3/14/2013 3:28:54 PM • Amerock Hardware... • 180 views • 1 helpful votes
1helpful
1answer

I have a Lithonia dusk to dawn flood light that's brand new there's also an on off switch. What does the on off switch control and for dusk to dawn should it be on or off?

  • When the switch is ON, the light operates in dusk-to-dawn mode. In this mode, the light automatically turns on at sunset and turns off at sunrise. When the switch is off, the light stays off.
4/18/2024 5:55:49 PM • Hardware &... • 15 views • 1 helpful votes
0helpful
1answer

Micromark MM 9565 Timer. How to set up the timerMM9565micro Mark timer

Question edited for clarity and add a header in order with spaces and CAPS. It appears Micromark got out or the timer business. There is a similar one in another Fixya post, and a link to them. https://www.google.com/search?q=Micromark+MM+9565+timer ..
2/19/2024 12:46:54 PM • Hardware &... • 35 views • 0 helpful votes
0helpful
1answer

Electrolux KOAAS31WX oven timer has maximum 20 minutes.

It sounds like the button contacts aren't making good contact. If you can get behind them you can spray them with electrical switch cleaner. ..
3/1/2024 10:02:35 PM • Hardware &... • 26 views • 0 helpful votes
0helpful
1answer

How to turn water heating temperature up?

2/18/2024 6:23:17 PM • Hardware &... • 27 views • 0 helpful votes
0helpful
1answer

How do I stop the timer on OXO digital timer # 1127980?

Manual

Instruction Insert

OXO https://www.oxo.com > wysiwyg > PDF_Files PDF The clock is set. • To set timer, press any button to enter timer mode. A timer icon will appear on the LCD screen. Press the and buttons to set the timer. 1 page ..
1/31/2024 12:40:47 AM • Hardware &... • 31 views • 0 helpful votes
0helpful
1answer

Lihom rice cooker manual english

You did not mention the model number. Anyway see this manual. It will help. CJH-PC1000_ENG.indd (cuchenamerica.com)
1/9/2024 7:26:44 AM • Hardware &... • 38 views • 0 helpful votes
0helpful
1answer

My T19 Kingshield automatic timer is clicking on and off. Kindly advise how to stop this happening.

Contact them for a free replacement. But first press and hold the Reset Button on upper right. https://images-na.ssl-images-amazon.com/images/I/71OhENnuRdL.pdf ..
12/26/2023 11:43:39 PM • Hardware &... • 32 views • 0 helpful votes
0helpful
1answer

Wiring a bypass for a soft start on a Ridgid R4514 table saw

The wiring diagram is here. There is a part called 'soft start' and parts appear to be in stock. In fact all parts but one are in stock. START SOFT SKU TTI-089240020009 In Stock $67.95 https://ridgid.ordertree.com/catalog/partslist/view/group_id/467808/?assembly=WIRING%2BDIAGRAM&assembly_id=57257 https://www.google.com/search?q=Ridgid+R4514+parts ..
11/18/2023 7:31:30 PM • Hardware &... • 69 views • 0 helpful votes
0helpful
1answer

Aube TH132 A Thermostat. I can no longer see the temperature setting, it flickers very vaguely for a short time.

Try a Power Reset. Disconnect all mains power to it for 15 minutes, press and hold any button for 1 minute. Reconnect the power. If that doesn't fix it, the thermostat has failed and you need a new one. Most have backup batteries that can cause the issue you are seeing, but the manual doesn't mention anything about batteries in the base unit.

Aube Technologies TH132 A/F/AF Owner's Manual

ManualsLib https://www.manualslib.com > ... > Thermostat View and Download Aube Technologies TH132 A/F/AF owner's manual online. Aube Technologies Control Module Owner's Guide. TH132 A/F/AF thermostat pdf manual ... ..
11/30/2023 10:18:30 AM • Hardware &... • 46 views • 0 helpful votes
0helpful
1answer

No output voltage on output of Defiant 49808 during programmed on time

$18 for a new one. They are fully electronic, the Triacs on the boards fail. https://www.google.com/search?q=Defiant+49808 ..
12/11/2023 11:25:01 PM • Hardware &... • 35 views • 0 helpful votes
0helpful
1answer

Timer turns off before the programmed setting

No make and model given, or what the timer is controlling, but there is generic timer advice here. https://www.google.com/search?q=Timer+turns+off+before+the+programmed+setting ..
12/9/2023 4:27:14 PM • Hardware &... • 33 views • 0 helpful votes
0helpful
1answer

How do I set it for 8 hours to go on @ 4:00PM? When I turn it to On lights go on but when i then switch it to 8 lights go off.

Christmas lights timer with a single button? The instructions are engraved into the back. It will go off and come back on after one full time cycle. You have to set it and then leave it alone. Don't set it in the dark (if it has a photocell) or after the time it is due to come on, so in other words don't set it at 6pm to come on at 4:00pm. All questions need 'make model (what it is)' first 3 words. ..
12/2/2023 5:54:53 PM • Hardware &... • 36 views • 0 helpful votes
Not finding what you are looking for?
Amerock Wood Finishes Knob; Stained, Maple, 1-1/4 Diameter Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Amerock Hardware & Accessories Experts

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66848 Answers

Steve Pack
Steve Pack

Level 3 Expert

7126 Answers

Are you an Amerock Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Amerock Hardware & Accessories

  • Amerock Hardware & Accessories

Most Popular Question

clean polish copper cabinet hardware

  • Hardware & Accessories
Loading...