20 Most Recent
Cornerstone FIC AD11 Socket A ATX Motherboard W/ AUDIO (BRAND ) Questions & Answers
Image wont display even with right click
Sounds like you may have the screen enlarged. Press your F11 button. It will maximize or minimize your screen (depending on what position it happens to be in at the moment). Let me know how that works for you. If it did, please rate my answer!
My computer doesn't show the image
1 st check all power connection cable if it not work then.................................emideatly contact u r dealer...
dont try to solve it by u r self.
u may damage u r computer..
best regards
Turn computer on but get no picture
please, go to the bios without inserting the video card and in the pci/plug device there is an option : initial display u can choose as AGP for the first display. then u can save and exit. after restarting the system u can turn off and insert the agp card and connect to the monitor. this will solve ur problem
Have 845G motherboard which will not allow windows
845G is kind of a generic intel chipset to give you a better answer I would need the manufacturer and the model number. But I have come accross some issue with Sata drivers on some boards that need to be installed before you install windows. How is this done? Well first you would need the driver and make a driver floppy (This is the hard part trust me all pc techs have horror stories about hard to find drivers). Then when you first run the install for xp and you get that blue dos-ish screen you will nottce the "Press F12 to install raid or third party driver" Press F12 it will ask you to insert your floppy and once you choose the right driver you are ready to install. Some Dell systems and Acers use restore CDs just to get around annoyances like this.
Hope this helps
7540 Compaq Monitor : Dry solder joints in Horizontal.
The best solution was to throw it out, and purchase a new LCD model, of another brand, as I expect there would be more troubles in the future with the Compaq model, seeing that this is the second time that dry solder joints have appeared in the two years I have had the monitor.
My Employer Says They Are Going To Cut My Wages. Can They?
If you are in the middle of a contract, then cutting your wages is almost certainly a violation of your employment law rights. While I am by no means an expert on this matter, I did have a similar issue years ago - mid-contract wage cuts - and I hired an
employment attorney to fight the case on my behalf. It turned out that my employer was basically looking to scare people into taking the wage cut.
They got into some pretty serious legal trouble for their transgression, and nothing happened to me in terms of wage cuts after that. If you are between contracts, your employer can re-negotiate your salary, but as far as I am aware, if you are in an agreed-upon contract, they cannot just decide to reduce your salary. If you want to settle matters, contest this action with support from a legal professional.
Solitaire master has a hang
clarify pi please. if you meant pi to mean main screen picture, you probably have used up your free time on this program.
Not finding what you are looking for?
