20 Most Recent
Questions & Answers
Sound blaster sb1070 driver for windows 7
Save hours of searching online or wasting money on HELP NUMBER +1 833 272 0777unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
amar creative 5.1 model no sb 1071 ami windo7 dard diver chay
I just installed Creative PCI Sound Blaster 5.1VX
These systems sense the speakers and you cannot use a Y connector on them. You need to get the individual speakers connected to the card and see how it performs. Also check the device manager in windows to see if it show any errors and last but not least what is the motherboard, the operating system?
3D MULTIMEDIA PCI SOUND CARD INSTALATION
Make sure you are installing the right drivers to your operating system. If this is an older sound card, goto the manufactures web page and download the updated drivers there.
A coma computer enthusiast has installed an old
ISA is a very old technology and cards usually require switches or links to be set to avoid conflicts with other cards. ISA is not plug-n-play like PCI or PCI-e.
The software talks to an ISA card by knowing parameters such as IRQ number, DMA number, address range. These values may be permanently set on some cards, while others allow changing via the DIL switches or jumper links. To get two ISA cards working in one PC, the two cards need to use their own IRQ, DMA & address ranges. Make sure there are no conflicts of settings on the sound card and the tape drive card.
Try changing the settings on one of the cards. The tape drive may be the easiest for this. The tape drive is probably connected via a ISA to SCSI interface card. This should have DIP switches or Links to allow the above settings to be changed.
Sound Blaster Live! 5.1 Sound Card: I had bought new creative 4.1 inspire m4500 but in...
It looks to me that the some of the options might be disabled in the sound properties menu.
Double click on the sound icon present on the left hand side of the side bar. Once the volume menu opens up, then click on the 'Options' menu ---------> Select Properties ---------> Once the Property Menu opens up. Look for the options Rear', 'Subwofer', 'Side', 'Front'.
Ensure all these options are selected. Click 'Ok' tab and close the box.
This should resolve your issue.
Please feel free to reply in case you face problem.
Have a nice day !
Not finding what you are looking for?