20 Most Recent D-Link DFE-530TX+ Fast Ethernet PCI Network Adapter Questions & Answers

you will have to open up your network connections

click start control panel network connections this may vary depending on your operating system look for local area connection if you see a red X or a yellow exclamation or question mark ! ?
you will need to update or install the driver or it could be firewalled

click start control panel administration tools computer management device manager scroll to network adapters should see a yellow question mark? right click install drivers
the driver might be on the disc supplied by your ISP internet service provider
or the motherboard disc or you might download one if you dont have on a disk

Make sure you Ethernet is enabled in bios restart your computer during the boot up process you will see on your screen a certain key to press to enter set up (BIOS) press and hold that key to enter bios using arrow keys scroll to intergrated peripherals look for SiS On Chip Pci Device press enter scroll to SiS 10/100m press enter make sure its enabled

if still no lucki

click start type cmd press enter you will be in DOS mode

type in ipconfig press enter

you will see all of your internet connection details

or type in your default gateway adress into your internet search should read something like to get an inertnet connection
hope this helps

D-Link... | Answered on Jun 26, 2012

If you have bought a new pci Ethernet network card then yes you can, you need to completely turn off the computer and unplug from the power socket, taking the side panel off and locating your pci card, un-screw the clip that holding it in place making sure you dont touch any other part of the computer, and taking the old one out, remove the packaging from the new pci network card and pushing it into place making sure its completely down and before applying the screw to fix it in place, put the side panel back on, plug in the plugs and turning the computer back on making sure you re-place the Ethernet cable, after which on boot-up your computer will say new hardware found and install it if it doesn't do it by itself you will need to search or insert the driver cd that came with it to make sure it works perfectly. please let me know the outcome of this Kronoguy

D-Link... | Answered on Jul 06, 2011

You need to go to the Dlink website here is the link for you Click Here

then select Drivers for the operating system you are using

D-Link... | Answered on Jul 20, 2010

You have not mentioned OS you are using, i am assuming that you have windows xp or later. Go to properties of my network places and click on create a new connection > Connect to Internet > connect to broadband that requires user name and password .. follow next steps as appears it will install PPPoe protocol and will make a connection also

D-Link... | Answered on Jun 26, 2010

You can download a driver for this card at
Please rate this solution. Thanks.

D-Link... | Answered on May 25, 2010

Make sure you allow in your firewall program. and you have ipx and spx protocal installed.

D-Link... | Answered on Nov 15, 2009


try this site they no longer have any tech support but still offer the drivers and manuals

D-Link... | Answered on Sep 25, 2009

Install the drivers and then configure , it with the IP address given by ur ISP. If your ISP is having DHCP enabled , then no need to enter the IP address .

D-Link... | Answered on Sep 11, 2009

First thing are all the micro-filters installed and in the correct direction? If they are then it sounds like your DSL signal is borderline and when the phone rings it is getting knocked out. If that is the case you will need a tech to come out and test the line.

D-Link... | Answered on Sep 10, 2009

Sounds like an IP address problem. Your IP address on both the NIC card (DFE 530) and the router have to be in the same address range. You can do this 2 ways. 1... Have your router hand out addresses automatically. Make sure DHCP is enabled and that you have at least one address available for it to give out. ie. through The first three number must be the same as the router. The other option is to manually set your IP address on your nic card to match the router. If the router is lets say then you can assign to your computer NIC. If you haven't been able to access your router then check your router manual to find out the default IP address and use the same number for your NIC changing only the last number. The largest number you can use is 255. Hope this helps.

D-Link... | Answered on Jul 12, 2009

IBM Laptop drivers are now provided by Lenovo. IBM sold their PC division a more than a year ago to Lenovo.

Go to www.lenovo.com, choose your country and then click on "Support & Downloads" at the top. Then, enter your product code (located on a sticker under your laptop). You will get all the drivers your need from there.

D-Link... | Answered on Jun 14, 2009

Are you using Windows XP? If so, pls make sure that the Wireless Zero config utility is enabled:

Start>Settings>control panel>administrative tools>services>highlight 'wireless zero configuration utility>click 'start the service'.

Then you will need to go back and open the page for network connections, view available wireless networks, click on advanced, check box 'Use windows to configure my wireless connection', click ok.

After this, do you see any networks in that screen?

D-Link... | Answered on Feb 17, 2009


D-Link... | Answered on Jul 04, 2008

If you have a wireless router then the ethernet cable will go between the modem and the router. Then you need a wireless LAN card to connect the PC to the router

What model router and modem do you have?

PC wireless card

D-Link... | Answered on Jul 03, 2008

access violation in module Uimain.exe at address oo6F6AB6
read address 000002EC

Computers &... | Answered on Feb 13, 2020

Ethernet/USB Print Server it is for even windows 98 (OMG )
page 7 is setup.
NO OS stated by you, at all. why:?
page 3 is OS compat.
after reset the default address is
5volt power pack is NOT OPTIONAL.
what did you read the free manual yet.
the last page shows printer compatibility list, does your match?

where would you find a printer that old working now.
my guess is 2003 year made. XP first release is that.
one manual for it stamped 2003 so is 17 years old
relic fodder for sure, recycle it is best.
first hit

RTM ! no 17 year old printer works today, not really.

D-Link Computers... | Answered on Dec 19, 2019

Not finding what you are looking for?
D-Link DFE-530TX+ Fast Ethernet PCI Network Adapter Logo

16 questions posted

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts


Level 3 Expert

4369 Answers


Level 3 Expert

8091 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

DFE D-Link

  • DFE D-Link

Most Popular Question

gateway 450 windows xp d link 530tx

  • Computers & Internet