Dell PowerEdge 1600SC Server - Answered Questions & Fixed issues


Not sure what "the drive forks" actually means.

The floppy drive usually connects via a dedicated connector on the motherboard by a ribbon cable similar to the IDE cables but physically smaller and of course to the power supply. If the drive, the cable and the motherboard is ok it should appear in the bios list ready to be enabled and added to the boot order.

If the floppy drive doesn't appear in the list you should refer to the motherboard manual as there might be some jumpers to reset or perhaps it is only suitable for a usb floppy drive.

Take the number from the motherboard and do an internet search which should direct you to a place where you can download a manual which will contain all the information you need.

Dell PowerEdge... | Answered on Nov 11, 2017 | 65 views


If you are using an image made from the IBM and it has a different processor and the board specs are different that can cause the drive not to boot it will act like it is then go into a perpetual boot. I would try to re image it again to insure that is ok on the drive also check the board If one is and AMD and the other an Intel then that would be part of the problem.

Dell PowerEdge... | Answered on Nov 02, 2017 | 93 views


Get creative.

This is not a tech support question.

This should be considered as "Closed."

Dell PowerEdge... | Answered on Jun 13, 2015 | 190 views


Go to Microsoft for drivers.

Dell PowerEdge... | Answered on Mar 19, 2014 | 65 views


Yes Doug. What is your problem with your Scsi controller device?

Dell PowerEdge... | Answered on Feb 01, 2014 | 57 views


Get a new one, you can not repair them.

Dell PowerEdge... | Answered on Jan 29, 2014 | 83 views


Bios too old and the 32 Bit system is inadequate to manage the function desired.

Dell PowerEdge... | Answered on Jan 29, 2014 | 243 views


the screen rem... ??

Dell PowerEdge... | Answered on Dec 19, 2013 | 89 views


It seems to be DRAM refresh error. Kindly unplug the RAM and plug it back.

Regards,
Kaushik Patel

Dell PowerEdge... | Answered on Nov 07, 2013 | 211 views


I guess you can't go into start button. /anyway how did you know if computing is powered? On your keyboard top line keys have screen control keys for brightness etc.eg f4. try.

Dell PowerEdge... | Answered on Aug 03, 2013 | 100 views


You can do that by doing the jumper settings procedure, you can find the steps from the user manual of your unit

Dell PowerEdge... | Answered on Apr 07, 2013 | 890 views


Re-seat it, If still failed, replace it.

Dell PowerEdge... | Answered on Mar 28, 2013 | 32 views


create a wipe disc from the internet or just install OS, When new OS is installing, before it does it automatically formats the hdd

Dell PowerEdge... | Answered on Jan 25, 2013 | 164 views


Hello here is the homepage.

http://www.dell.com/support/drivers/us/en/ussoho1/Product/poweredge-1600sc

There should at least be a message on the monitor indicating there is no signal coming to the monitor. The first thought that comes to mind if all is connected would be that the power supply has failed.
And maybe the graphic card.

Call also the DELL support in your country they will be glad to help
and they probably know the fault.

Contact Us 1-877-671-3355

Good luck

Dell PowerEdge... | Answered on Nov 26, 2012 | 204 views


It hangs there probably becuase one or more of the drives are dead or are almost there. Check and see the lights on the drives are falshing funny or too long or are yellow. If you find one of them that are that way, pull it out and then reboot.

See if that helps.

Dell PowerEdge... | Answered on Sep 22, 2012 | 497 views


Hi
My is working , i have same dell server 1600 , i download the driver from LSI website here is the link
http://lsi.com/storage_home/products_home/host_bus_adapters/scsi_hbas/lsiu320/index.html?remote=1&locale=EN

you just need u320 scsi driver for server 1600sc

download XP driver 32 bit it will work
victor

Dell PowerEdge... | Answered on Sep 11, 2012 | 2,493 views


hv u tried booting from other CDs .
if u can boot from other CDs , then this 2003 CD is botched , change it.

Dell PowerEdge... | Answered on Jul 21, 2012 | 2,687 views


reformat.

Dell PowerEdge... | Answered on Jun 08, 2012 | 64 views


disable OS INSTALL MODE in BIOS setup

Dell PowerEdge... | Answered on Jun 16, 2011 | 157 views


Hi,
According to you your server doesn't work properly and you get a beep sound and a still HD led, OK don't worry.In this situation I think you don't get display also. Anyways, first unscrew your system and open the panel of the cabinet. Then unlock the memory slot holder, take out the memory/Ram. make it clear by eraser. clean the metallic chip which is attach with slot. after that replace it again in same or other slot carefully by a little push. notice the notch of the Ram while replace it. It will solve your problem.

Dell PowerEdge... | Answered on Apr 28, 2011 | 127 views

Not finding what you are looking for?
Dell PowerEdge 1600SC Server Logo

117 questions posted

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...