20 Most Recent Konica Minolta Bizhub Press C6000 Copier - Page 8 Questions & Answers


model number would help #####################

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jun 22, 2019


Replace the fuser unit. then reset, with procedure:

Konica Minolta... | Answered on Jun 07, 2019


11.5.4 MAINTENANCE COUNT.
A. Use
• To display the count of the maintenance counter.
• When the counter reaches "0", maintenance call M1 or the service call will appear, according to the setting on MAINTENANCE COUNT. of SERVICE'S CHOISE.
See P.85 below
e
• To enter an appropriate counter value (0 to 999999) as the tentative maintenance time.
• Specify the setting on maintenance counter to "1" or "2": If the maintenance life is
reached, the maintenance call (M1) or service call [Call Service (M1)] will appear.
"0" : Not counted
1 : Counted (The maintenance call display is given when the counter reaches 0.)
2 : Counted (The service call display is given and the initiation of any new copy cycle
is inhibited when the counter reaches 0.)
NOTE
• The counter value is decremented until it reaches -999999 even after it has
counted 0.
B. Procedure
• The default setting is 0.
• When "1" or "2" is selected, a screen will then appear to allow the counter value to be
entered.






• To clear the count, use [CLEAR DATA] of the SERVICE MODE.


Procedure below to enter::


11.2.1 Starting procedure
1. Press the Menu/Select key.
2. Press the following keys in this order.
Quick Settings Quick Settings left arrow twice the right arrow then left arrow
.
11.2.2 Exiting procedure
• Press the Back/Stop/Reset key as many times as it is required to display the initial
screen.
11.2.3 Changing the setting value in SERVICE MODE functions
1. Select the desired item using [??/??/??/??] key.
2. Select the setting value using [??/??/??/??] key.
3. Validate the selection by pressing the Menu/Select key.
4. To go back to previous screen, press the Back/Stop/Reset key.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jun 06, 2019


Do what it says and call service.

Konica Minolta... | Answered on Jun 06, 2019


Hello, this is related to Magenta write ulit/laser unit. Check connecters both to write unit and that of pcrb. Mostly this error come after removing and replacing the units. Otherwise replace the unit. Some time rewriting firmware clears the error but thos should be the final option.

Konica Minolta... | Answered on May 31, 2019


Could be that the tab that acturates the sensor to tell the copier the door is closed is broken,check the door itself any damage to the tab or the senor the tab acturates is dirty or broken from its mount or bad

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on May 22, 2019


Contact Konica Minolta directly to inquire.

Konica Minolta... | Answered on May 08, 2019


Check the drum and developer

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on May 07, 2019


Do you have a print controller IC 409 with this machine need to know prior to continuing to trouble shoot.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on May 07, 2019


Have problem with the control board and image control boards

Konica Minolta... | Answered on Apr 28, 2019


Sir, Check the slit glass for the print head (LASER)

Konica Minolta... | Answered on Apr 28, 2019


have you check the wiring between the printer control board and the write unit may be pinched, if you have try all that mention above, better you try to replace PRCB.

Konica Minolta... | Answered on Apr 28, 2019


menu
counter
display keypad
stop
0
0
stop
0
1

Konica Minolta... | Answered on Apr 27, 2019


FIXING ERROR

Konica Minolta... | Answered on Apr 23, 2019


need a developer or turn off press stoop button and turn on :) (it's a truble reset )

Konica Minolta... | Answered on Apr 22, 2019

Not finding what you are looking for?
Konica Minolta Bizhub Press C6000 Copier Logo

Popular Tags

53 questions posted

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6960 Answers

carpediemweb

Level 1 Expert

51 Answers

George Mclaughlin

Level 2 Expert

369 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Konica Minolta Office Equipment & Supplies

  • Konica Minolta Office Equipment & Supplies

Most Popular Question

please set replenish toner unit

  • Office Equipment & Supplies
Loading...