20 Most Recent Konica Minolta KONICA BRAND TN-211 BLACK TONER FOR BIZHUB C200 AVG YIELD 17500 PAGES AT 5 % COV - Page 3 Questions & Answers

The motor that moves the LASER beam around is bad. The motor is housed inside the Printhead which is consider one unit. You can just replace the motor you replace the print head.

Replace the drum developer and run the required TCR procedures.

Turn ON the power switch with the Stop/Reset key held down. code is for the fuser the hot part that fuse the toner to the paper. Replace may be needed.

Does tray two work or the by pass tray?

Replace the drum and developer

Well there is a chip on the toner cartridge you would have to replace that as well since you can get them replacing the toner will do no good as the printer does not know you replaced the toner. Buy a proper toner cartridge.

Hard Disk /hard Drive is unformatted. Format in service mode.

Well first what do the bad quality prints look like what color strip or does black white work ok? Need more info.

Code is assigned to MFB (Multi-Function board). To reset power off wait 10 seconds power on. If code returns then MFB board is bad. Might try updating firmware. Have tech do that as Konica Minolta Firmware is located on a secure website. They have to protect there OS's software.

exposure lamp or CCD issue. both located under the big glass. The CCD is the large black device on the right. The scanner is device on left that lights up scan a document though the Doc feeder or main glass. try this reset FIRST, if this code comes back. Have a technician look at it DO NOT CONTINUE TO RESET the code!!!! AS this is for the Hot Part called the destroy the lamp or CCD 1. Turn OFF the main power switch. 2. Turn main power switch ON while pressing the Utility/Counter key. 3. Touch [Trouble Reset]. 4. Check to make sure that [OK] is displayed and the it has been reset. 5. After turning off the main power switch, turn it on again more than 10 seconds after and check if the machine starts correctly Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

I need to be able.to.fax on my machine

that code is not listed anywhere. https://www.google.com/search?q=C1070+printer+error+code+c-4526 ..

Go on line purchase a new waste toner box and replace it you can also dry to vacuum the box out. but watch what you use as a vacuum clear as older ones don't have the best filter and toner can run strait though it making a mess

Sir/Mam,Recommended you have a technician come out to re flash the copier operating system (NOT printer driver). But the software that runs the copier, it is located at a secure web site at Konica Minolta, any firmware is access able to dealerships and KMBS only. They like to protect their copier Operating Systems.

Replace the image unit which includes the drum and developer and ensure clear drum and developer counters and you run the F8 procedure.

What is the model of the machine?

Replace the Black drum and developer unit (P9) (P16) and clean the IDC forward sensor(P5) (Requires removing the Transfer belt) L4 Black Drum Rotation well passed its life.

Can you please describe the actual problem otherwise we can't help you.

it needs service, cleaning, head clean mode. a full cleaning service is need, call and get some from makers site?

remove the hard drive.