20 Most Recent Epson Stylus C46 InkJet Printer - Page 8 Questions & Answers

If this is a color printer, then you cannot use it without the "Black" cartridge.

Most printer manufacturers will pull from the "Black" ink to print black on color images. They do this to save on creating a "processed black" from the color inks.

Just curious, are you using a "CMYK" system? (Cyan, Magenta,Yellow and Black inks)

Don

For now, get them in the center and remove the power or manually move them out with power off.

you can download Adjustment program of Epson C45 From "Indoresset"Webside.
The printer have to reset wast pad counter.

Thanks

If an Epson gets below a certain level in Ink for any cartridge, it will simply not print at all so if any of your cartridges are low, I suggest replacing them.

http://esupport.epson-europe.com/ProductHome.aspx?lng=en-GB&data=dkmEK02SU002Fer6qudElZT5RHsMyD4iBT1M&tc=6

download the driver from the epson website
http://www.epson.co.uk/Printers-and-All-In-Ones/Inkjet/Epson-Stylus-C46/Drivers-Support?supportLandingPage=true

Hi,

Firstly check whether the paper gets rolled out of the printer correctly without any damage. If so check the printer's Printing head and ink catridge. IF the pritner remains unresponsive when u gives the print instruction then check the printer driver and printing software in your system.Hope this will solve yur problem

Thank You

Please rate me as it wil cost u just one click

Probably the waste ink tank is full.Look here.

the exact error message should be parts inside your printer is at the end of its service life...... visit the website for epson......this is in regards to your ink pad counter.....the website is www.epson.com/ipr

If printer lights flashing alternate the waste ink tank is full.
You try reset printer with this program http://www.refillinstructions.com/Epson/EpsonServiceUtility.htm

The black may have dried up.
You must do the head cleaning until it starts.

Ultimately, you may need to replace the black cartridge after you clean the black cartridge cavity, using eyeglass cleaner on a Q-tip.

Try to reset the printer counter back to zero. Read this link for some information regarding resetting the printer.

http://tricks-collections.com/reset-epson-stylus-color-printers/

Goodluck

may be you have to chang the ink

you can always change without worrying about the ink levels. Be careful though, make sure that the printer is READY for cartridge removal.. good luck!

Unfortunately, till now there is no resetter for t10 for free. Only distributor have it. Just take to service center.