20 Most Recent Epson Stylus C20SX InkJet Printer - Page 9 Questions & Answers

Check manual, if too slow you may need to replace it.

Cleaning cycle, print ink pattern to see which ink to replace

Epson is the maker and you should follow their lead.

Poor connection at the cables

You need to perform a counter reset on the printer. It requires a software depending on your model. You can download the reset software here: SSC Service Utility for Epson Stylus Printer Please take note to download only the software that supports your printer model. Use the software to clear the inkpad counters ONLY.

you will need to go to epson site try here Epson Stylus Photo R380 Ink Jet Printer at the drop down window next to Operating System: pick you operatind system then download

Hi if you got this massage it's means that parts in your printer get to finish of their life and you suppose to send it to Epson for service. Have a look here Epson Ink Pads Reset Utility . There is a software which allows you to reset your printer counters but this is just part of the service, you need to replace ink waste pads, container or diverted the waste ink to some bottle otherwise ink gonna be split inside the printer everywhere.

1A39 is a print head failure. The head needs to be replaced although it is very expensive and you are better off buying a new printer.

Disconnect the Universal Serial Bus (USB) cable from the back of the product, but leave the product turned on Open the cover of the product and remove the print cartridges Close the cover and wait for the Insert Ink Cartridges message to display Disconnect the power cord from the back of the product and wait for one minute Reconnect the power cord. If the product does not automatically turn on, press the Power button Open the cover and reinsert the print cartridges Close the cover. If prompted, print a calibration page. Hope It's resolve all Your Printer Problem, Or Still having Problem Then follow Us ForEpson Printer Support

• Make sure you selected the correct paper size settings in your printing program and printer software.
• Run a print head nozzle check to see if any of the nozzles are clogged. Then clean the print head, if necessary.
• If a blank page exists in a document you are printing and you want to skip printing it, selectSkip Blank Pagesetting in your printer software.
  1. Do one of the following:
     • Windows 7: Click, and selectDevices and Printers.
     • Windows Vista: Click, and selectControl Panel(or point toSettingsand then selectControl Panel). SelectPrinter(underHardware and Sound) orPrinters.
     • Windows XP: ClickStart, and selectControl Panel(or point toSettingsand then selectControl Panel). SelectPrinters and Other Hardware(if available) and thenPrinters and Faxes.
  2. Right-click your printer icon, and then selectPrinting Preferences.
  3. Click theMaintenancetab, then select theSpeed & Progressbutton.
  4. In the Settings area, click on theSkip Blank Page.
  5. ClickOKas necessary to save your settings.
• Hope It's resolve all Your Printer Problem, Or Still having Problem Then follow Us ForEpson Printer Support

Reinstall software

If printer is slow printing everything, carriage may be loaded with dust, grime or ink. If that's the case then it's time for a new printer, it's cheaper than having it repaired.

Print speeds are preset at factory and cannot be changed. Get a new printer.

Check if drivers are uptodate.

You should be able to go to Epson's internet site and download the driver. There are numerous sites online to download drivers and most are free. You may have to restore to an earlier time before you deleted the driver. That should resolve your problem.