20 Most Recent Epson TM-T60 Printer - Page 6 Questions & Answers

support.epson.com/

1. Turn off printer and open printer.
2. Open your Epson main PCB board. You can view an 8 pin CMOS IC. That is Epson waste ink counter IC and found on all Epson Printer.
   
3. You can reset your printer without any resetter by following these ways.
4. Soldering pin no 1,2,3,4 by wire as show in PICTURE and now turn on printer for "20 second"
   
5. After 20 second turn off printer and remove soldering wire from pin no. 1,2,3,4 ( back in original condition)
6. Now turn on your printer
7. And now your printer will be RESET

Note: This method is not recommended for beginners so you have to understand what you are doing. All problem caused by this tutorials is not our responsibility. Use this tutorial as your own risk.

go to epsom support downloads find your unit and download the drivers.

When you are facing it. Open it and on the right hand side where Led lights located. Below it and inside are there is a dip switch cover that you should be able to remove. Hope this helps.

Your paper roll is empty but if it's not the paper sensor is not working. Send it to a technician if sensor is bad or buy a new printer.

Please share the printer model.