20 Most Recent Epson TM U325PD Matrix Label Printer Questions & Answers

The types of printers that you have actually should be assigned to a free port, you cant setup 2 printers on the same port. check at the back of the printer the physical attachment of two printers the OKI and the Epson, if Oki is set to lpt1 then assign port from printer properties for oki to lpt1, and lpt2 on epson. 1 printer- 1 port, so by then check if the box for enable bidirectional support is check, remove the check mark from the box by clicking on it then hit apply then try printing a test page then try printing from application.

Hi,

You should visit this site and register for a driver download for this printer

Kohler 30 - 800 Amp Series S38

When you are facing it. Open it and on the right hand side where Led lights located. Below it and inside are there is a dip switch cover that you should be able to remove. Hope this helps.

Your paper roll is empty but if it's not the paper sensor is not working. Send it to a technician if sensor is bad or buy a new printer.

Please share the printer model.

You need a programmer.