Samsung 40" 1080p 120Hz Slim LED Smart TV UN40ES6100F - Answered Questions & Fixed issues


When repairing LED TV Back light assembly you need to contact expert person because lifting of LCD TV panel is very dangerous for non technical person. Be careful

37173103-9860-4e74-ba0c-e24133de2091.jpg

Samsung 40"... | Answered on Jan 04, 2020 | 2,332 views


Hi,

I hope I can help with this. It could be either the colored cables are not positioned correctly (they should all be on the same row) or it is on the incorrect TV Input. This can happen when we have other devices connected to the TV such as CAble box, gaming console (xbox, ps4,wii), dvd player, etc. The fact that you said the HDMI cable works fine and shows picture, it tells me it has to do with those colored cables.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/laura_08254539050d64db

Samsung 40"... | Answered on Jul 28, 2016 | 31 views


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/

Samsung 40"... | Answered on Jan 18, 2016 | 418 views


yes you have to set it up on the right channel etc , just like putting on a accessorie like a cd player or radio etc ,

Samsung 40"... | Answered on Dec 15, 2014 | 60 views


Visit the official website to your TV brand. You can get details about how to register your set with them. Electro help

Samsung 40"... | Answered on Oct 14, 2014 | 159 views


www.retrevo.com/
Try this link to download the manual.
Electro help

Samsung 40"... | Answered on Oct 02, 2014 | 264 views


Check and replace damaged component/s at it main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Surf the site with patience. Pull up older posts. Do asearch by type in the brand name of your device at its search box.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis.

Samsung 40"... | Answered on Jul 18, 2014 | 82 views


2590,220184839

Samsung LE... | Answered on Aug 17, 2016 | 120 views


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience.
If blinks continue without any pause, the main board is faulty.

Samsung LE... | Answered on Mar 11, 2015 | 289 views


you will need to replace the leaky capacitors in the power supply circuit. You can locate the faulty capacitors with a visual check. Those that are bulging need to be replaced.

Samsung LE... | Answered on Mar 04, 2015 | 688 views


Most likely the power supply capacitors. you can identify them by their bulging tops.

Samsung LE... | Answered on Jul 24, 2014 | 1,246 views


Hate to give you some bad news...But, It sounds like you have a bad screen. Samsung had several issues with the screens on this model. You may get lucky and may have a bad T-con board. The small board at the top center of the TV. If you want to give it a try? Buy a used one,so you don't loose that much money. If is the screen? Some people have had luck complaining to Samsung about it. They may provide a replacement screen,but you still have to pay a shop to install it. The T-Con board part number is...shopjimmy-lj94-02601f-top.jpg Samsung LJ94-02601F or this one depending on what screen is in yours. shopjimmy-lj94-02349c-top.jpg Samsung LJ94-02349C

Samsung LE... | Answered on May 06, 2014 | 299 views


http://www.alibaba.com/
Try this link.

Samsung LE... | Answered on Apr 01, 2014 | 62 views


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power led, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating, to many popular brand TVs and other devices. Viewing it in "Mosaic" will make surf easy.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience.

Samsung LE... | Answered on Mar 28, 2014 | 32 views


hi it sounds like the lvds may just need cleaning also the connections on the tcon board hope it helps

regards
shaun

Samsung LE... | Answered on Mar 26, 2014 | 206 views


Please check the ribbons between TCON and panel. There seems some loose connection problem.

Samsung LE... | Answered on Dec 25, 2013 | 74 views


I have the exact same TV with the exact same problem. The issue is called diffusion and is not repairable. A Samsung repair tech can adjust the voltage settings but this will only work for a few weeks and cost a little more than $100. If you call Samsung they may be willing to issue you a new panel gratis (they did for me) but you will have to pay labor for the swap (about $400). If you do this the new panel will start to act up just like the old one so I would advise against it. Samsung will also claim that this is not a common problem which isn't true - especially for the 58" models which are seeing many extended warranty claims (which I didn't purchase).Best advice is to deal with it until you can't take it anymore and then buy a new TV but avoid Samsung in general and especially their plasmas. That is the route I am taking. And bashing Samsung for bilking me out of $400 6 months ago to replace a defective product with an equally defective one and then saying so sorry but you're now on your own.

Samsung LE... | Answered on Nov 22, 2013 | 177 views


Check the backlight inverter board. It is faulty. There is no repair to these boards, if the inverter transformer on it is damaged. Card base replacement only can be done. To get more details, http://electronicshelponline.blogspot.com/

Samsung LE... | Answered on Nov 14, 2013 | 54 views

Not finding what you are looking for?
Samsung 40" 1080p 120Hz Slim LED Smart TV UN40ES6100F Logo

17 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76407 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...