20 Most Recent Fujitsu Siemens Celsius 460 (LKN:FKR-547310-032) PC Desktop - Page 3 Questions & Answers

need avn2205d manual in english version

the bios is the computer settings//not when you log on.

Download the SP3 installation ISO. Save it to your Desktop. Download ImgBurn and save it to your Desktop. Double-click the installation executable for ImgBurn and click "Next." Follow the remaining onscreen prompts and click "Finish" to complete installation of ImgBurn. Insert a blank CD-R/DVD-R into your DVD drive. Open ImgBurn by going to "Start," "Programs" and "ImgBurn." Click "File," then "Browse for a source file." Navigate to your Desktop and select the SP3 ISO file. Click "Open." Click the blue "ISO to CD" button located on the bottom left of ImgBurn. The program will begin creating the Windows XP SP3 installation CD. This process may take anywhere from 10 to 20 minutes to complete depending on the speed at which the CD-R/DVD-R is being burned. Click "OK" once the CD-R/DVD-R has finished burning. You've successfully created a Windows XP SP3 installation CD. http://www.microsoft.com/downloads/details.aspx?FamilyID=2fcde6ce-b5fb-4488-8c50-fe22559d164e&displaylang=en xp pro sp3 iso http://www.imgburn.com/ Download the iso also download the imageburn or http://windows-xp-pro-startup-disk.soft32.com/ Bootable disk for XP Professional. The Windows XP start up disk allows computers without a bootable CD-ROM to perform a new installation of the operating system. Hope this helps.

You will have to reset the motherboard. Bit tricky on a laptop as difficult to get to. Try and find the reset switch usually 2 pins that you have to short out and this resets the mother. Unfortunately you have to take the laptop apart. Take it apart bit by bit till you can access the motherboard. Even if you took the battery out and let the onboard battery drain out, you may still have the password, and my take months to drain the onboard battery.

Snahaqyegbsqhhj vqjqhqfthwjqrj

Sometimes the most up-to-date device drivers aren't the most compatible. Downgrade your driver to an older version.

Hello, Lori -If you received a user's guide for your laptop when you purchased it, check the manual, starting on page 30 for instructions on using the stylus (called a pen) in the guide.If you do not have a user's guide for your laptop, you can find and download one here (free):http://solutions.us.fujitsu.com/www/content/pdf/SupportGuides/T4220_UG_B5FJ-4091-01EN-00.pdfYou will need Adobe Reader software (free) loaded on your laptop. After you download the guide, save it with a file name you can find easily - something like: Fujitsu Lifebook T4220 Manual. If your laptop is connected to a printer, you can print the guide for easy reference. The information on using the stylus / pen begins on image 40 (page 30) of the PDF document.Information from page 31 (image 41 in the PDF document) regarding the pen:CALIBRATING THE PENIn order to ensure accurate tracking between the pen and cursor, you must run the Touch Screen Calibration Utility before you use the active digitizer for the first time, or after you change the display resolution.To run the calibration utility:1. Go to Start -> Control Panel and double-click on the Tablet and Pen Settings icon. 2. Click Calibrate.3. Adjust the display of your Tablet PC to a comfort-able angle.4. Using the pen, firmly touch the screen directly on the (+) symbol; the (+) symbol will move to the next location.5. Repeat step 4 in the four corners, then click OK.Best wishes.