20 Most Recent Indesit 18 in. D41 Slim-Line Free-standing Dishwasher Questions & Answers

I used the solution above and my dishwasher now working!!! I would add, plenty of towels and a tray or three to catch the stinking water that comes out of the outfow when you tip it up. Yes 6 screws to remove the back, but on the Indesit IDL40 two additional longer screws in the centre are helpful to remove. Then just tuck the bit that was attached out of the way. My pump was cream and white - check out pumps online to see what they look like. Undo the one screw holding the pump in place and then you have to twist it to release three little pegs. I washed outs loads of small bits of grit. Then easy to put back together. Re-attach the drain pipe to your drain, electric plug at wall and water inflow pipe. (Check for leaks!) I am so happy! Took me two hours but I had to hunt for the info and find the hidden screwdrivers. Husband will be pleased I think.

Indesit 18 in.... | Answered on Jul 03, 2018

You have a component down to earth. The problem isn't the start button. Most likely to be the element, but ciuld be wash or drain pump. Check the element with a resistance meter first, when you find the componant at fault, replace it

Indesit 18 in.... | Answered on Feb 04, 2018

Hi try checking if the drain outlet pipe is blocked by this I mean blow down the pipe it takes a bit of puff but if you cant then there's is something blocking the water from getting out, either a blockage or the water pump not working enabling the washer to start the new cycle
I hope that helps cheers eric

Indesit 18 in.... | Answered on Nov 16, 2017

You can find a manual online. Get a copy & see if they tell you how to remove the arm.

Not sure of the distinction between turning & spinning you cite.

Check that some food item has not become lodged and is binding the arm. Empty the washer, remove the rack & invert on a counter to get optimum access to the arm. The problem may become obvious.

Good Luck

Indesit 18 in.... | Answered on Sep 29, 2015

Most probably there are some left overs inside the printer. Open and check again. Sometimes the sensor becomes dusty, just use a blower to clean away all dust in the printer. Try opening the covers and clean away...

Indesit 18 in.... | Answered on Aug 30, 2014

the water level sensor is disconnected but probably bad and needs to be replaced. This is possible to be done by you but I like when they do it, any thing happens you have there insurance to make repairs and be responsible for property damage.

Indesit 18 in.... | Answered on Apr 24, 2014

Not finding what you are looking for?
Indesit 18 in. D41 Slim-Line Free-standing Dishwasher Logo

187 questions posted

Ask a Question

Usually answered in minutes!

Top Indesit Dishwashers Experts


Level 3 Expert

85239 Answers

Paul Bade

Level 3 Expert

1666 Answers


Level 3 Expert

8546 Answers

Are you an Indesit Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Indesit Dishwashers

  • Indesit Dishwashers

Most Popular Question

samsung gt c3322 display light problam

  • Dishwashers