20 Most Recent IBM WorkPad c3 Questions & Answers


Hello, Fedecianfi - The person who answered your earlier question and whose advice you appeared to have followed may not see your question here. You can return to your earlier question and add what else you need help with by choosing Comment for the answer given by JDTec. This is the link to your earlier question: http://www.fixya.com/support/t9648096-old_workpad_ibm_c3_like Best wishes.

IBM WorkPad c3 • Answered on Feb 11, 2018


This is not how you reply to an expert you must use the original link send you via email provided.

IBM WorkPad c3 • Answered on Sep 23, 2017


I have CD Software, but you need the craddle in order to connect your WorkPad with the PC.
I can send you that Software by e-mail, my e-mail: [email protected] from Buenos Aires - Argentina. Please, write in the Subject box "IBM WorkPad Software"

IBM WorkPad c3 • Answered on Sep 15, 2011


Hi,

Heres a guide with pictures how to replace battery:

http://www.ifixit.com/Guide/Repair/Remove-IBM-WorkPad-c3-Battery/3880/1

GoodLuck!

IBM WorkPad c3 • Answered on Jul 11, 2011


You need to download the Desktop manager and Hotsync for your WordPad C3. For your old device, you'll need 4.1.4.

Palm Software: (you may have to run it in WinXP compatiblity mode)
http://kb.hpwebos.com/wps/portal/kb2/common/article/37014_en.html


User manual:
http://old-organizers.com/Manuals/IBM/WorkpadC3_en.pdf


Good Luck..............

Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

IBM WorkPad c3 • Answered on Jul 02, 2011


Dear clockguy,

According to IBM it is possible. Is it your device comes with USB and Bluetooth Support. Let me know.

IBM WorkPad c3 • Answered on Feb 01, 2011


Their is noway to retrieve lost data on the workpad c3, unless you have it interfaced. Ounce the backup battery has been removed any stored data will be removed and the unit will come back to factory default.
Please see your users manual for complete details.

IBM WorkPad c3 • Answered on Oct 15, 2009


Turns out the little button on the top left of the device is for adjusting the contrast. Turn on the WorkPad. Press the little button. Then hold down the down button and the contrast will be adjusted.

IBM WorkPad c3 • Answered on Jun 01, 2009


go to palm.com and download palm desktop

IBM WorkPad c3 • Answered on Mar 25, 2009


Have you tried a hard/soft reset? any noises indicating it is on?

IBM WorkPad c3 • Answered on Feb 09, 2009


Please check if you don t have any security active under your wordpad. That might block you activesync conection

IBM WorkPad c3 • Answered on Aug 07, 2008


hold the power button or 3 sec.

IBM WorkPad c3 • Answered on Jun 22, 2008


Tastiera indicated that you have a keyboard problem. Most desktops can't run without a working keyboard. (You need the keyboard connected and working during the power-on self test, POST.) Currently the motherboard can't communicate with the keyboard. What is the model number for your computer? I don't recall a Platinum III, just a Pentium III. Is it a laptop or a desktop? What type of keyboard do you have (USB or PS/2 connector) or is it the built-in one of a laptop? Are you using some sort of converter/adapter for the connections? The USB to PS/2 converter for a mouse does not work with a keyboard. There are some USB to dual PS/2 converters available. However, they don't work with with all motherboards. What OS is installed on the system? Try a different keyboard. (You should try a PS/2 keyboard if the system has PS/2 ports. If the OS is older than Windows 98 v. 2, then the USB ports are even more likely to not see the keyboard in POST.) If you use a USB keyboard, try different ports. If possible, make sure that the keyboards work on other machines. If it does, then I recommend replacing the system. The Pentium III is a ~20 year old CPU. That's certainly old enough to have major failures. I hope this helps. Cindy Wells

IBM Computers &... • Answered on Jan 30, 2021


Hi blue_sky_day,
While googling on the net, I found something related to your problem at this web site: http://www.howtomendit.com/answers.php?id=12813
There are explained many things about your IBM 600E Thinkpad, you will have to read it and see if you can solve your trouble.

Yours sincerely.

IBM Computers &... • Answered on Jul 11, 2020


RTM , on the APP, be first.. good luck this old, finding it. google all day?

IBM Computers &... • Answered on Feb 22, 2020


Connecting boot devices and adapters - IBM server with 2008 r2 server

IBM Computers &... • Answered on Oct 10, 2019

Not finding what you are looking for?
IBM WorkPad c3 Logo

24 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top IBM Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you an IBM Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

WorkPad IBM

  • WorkPad IBM

Most Popular Question

hotsync palm lllx

  • Computers & Internet
Loading...