20 Most Recent
IBM WorkPad c505 - Page 8 Questions & Answers
Backup using Tape LTO06 TS32000 IBM Library
Tapes do brake, at the end of the day they are mechanical devices.
Just throw it away and buy another one.
But it can be reformatted or checked using IBM utilities from the atape drivers in case you still want it (ITDT or tapeutil)
http://www-01.ibm.com/support/docview.wss?uid=ssg1S4000662.
How do I get into a BIOS that does not boot.
you mite cold boot, when the system turned off and nothing is running wait about 10 seconds, than push F10 when you are booting up.
if you want a copy of the bois manual for your motherboard than type the following information
the board############### bios manual
the code error do this
www.ask.com/error 0271 [check the date & time in bois]
/error 0176 [ there isnt one in my tech book]
My IBM g40 shows a lock on screen.won't do anything
you may have to put in a password. if the bios screen is where you need to put in the password and you don't remember it you should be able to clear the password in the BIOS you would have to get to the main board to see if there is a jumper to reset it or you can remove the main battery and the BIOS battery and wait about 10 minutes for it to fully discharge to let the password clear itself out of the BIOS. If you don't remember putting a password on your system then you have to find out who did and get it from them.
Intel 945 motherboard
you are having a conflict with one of the devices in the computer that you have installed. when did you start having this issue, what did you do before you installed to keyboard, is this a new motherboard or i do not think it could be IRQ issue but you have two devices that are trying to use the same IRQ address and that is complex and do make any since in this day and age of computers,
you may want to try another keyboard or
go to intel forum post the issue on there site and maybe they will have an idea what else is going on.
How do I disassemble an IBM optical mouse model # mo18bo?
when look at the bottom of the mouse find the manufacture label or do not remove void warranty sticker, there will be a screw under these labels and also if you have battery compartment there maybe a screw inside the housing. if all fails, than it probably a snap together and you are going to fix it or brake it.
Not finding what you are looking for?