20 Most Recent
IBM WorkPad c505 - Page 6 Questions & Answers
IBM Thinkvision Automatic turn off please fix it
Unsure if it uses a VGA, DVI, or Hdmi, if you are using a video card with several monitor connections, try switching the connections. I was having the same problem untill I did just that. In other cases, your PC might be going on sleep mode.
Hi
You know if Ibm 45w1959 have Windows 7 driver
I wasn't aware Windows 7 needed any drivers.
In my experience Windows 7 will load onto any IBM compatible PC. In some cases additional drivers will be needed but that usually won't be apparent until afterwards.
How can I correct non system error?
The most common setup on BIOS boot order is the removable media first. IF there is a drive problem then that computer changes to the next item in the boot order. What you are describing is a failure to detect any of the boot devices. Check the CMOS battery to make sure it is ok. The easiest way to do this is by looking at the clock time and date on the BIOS screen. If it is wrong then the battery has died and the computer can not remember the devices. IF you had disk problem to start then the hard drive might have failed.
Ibm3490: has a tape stuck in the drive
Then raise a call with IBM Hardware:
How do I create a PMR (aka Service Request) for support?
http://www-01.ibm.com/support/docview.wss?uid=swg21507639
Not finding what you are looking for?