20 Most Recent HP Photosmart C7280 All-in-One Printer - Page 7 Questions & Answers

If your HP Scanjet 200 is not working, here are some troubleshooting steps you can take:

1. Check the power supply: Make sure the scanner is properly connected to the power source and that the power cord is securely plugged in. If it's connected to a power strip or surge protector, try plugging it directly into a wall outlet.
2. Check the USB connection: Make sure the USB cable is properly connected between the scanner and your computer. Try using a different USB cable or a different USB port on your computer.
3. Check the scanner driver: Make sure the scanner driver is properly installed on your computer. You can download the latest driver from the HP website and reinstall it.
4. Restart the scanner and computer: Turn off the scanner and your computer, then turn them back on and try scanning again.
5. Clean the scanner glass: If the scanner glass is dirty, it can affect the quality of the scanned images. Clean the scanner glass with a soft, lint-free cloth and a non-abrasive glass cleaner.
6. Check for error messages: If there are any error messages displayed on the scanner or on your computer, check the HP support website for more information on how to resolve them.

If none of these steps resolve the issue, it may be necessary to contact HP support or a professional technician for further assistance. They can help diagnose and fix the problem safely and effectively.

Error code 62.2 on an HP LaserJet 2420 printer usually indicates an issue with the printer's internal memory or storage. Here are some steps you can take to troubleshoot this issue:

1. Turn off the printer and unplug it from the power source.
2. Remove any accessories or optional components that are installed in the printer, such as an optional paper tray or additional memory.
3. Power on the printer and see if the error message has cleared. If it has, the issue was likely caused by an incompatible accessory or memory module.
4. If the error message persists, try resetting the printer to its factory defaults. To do this, turn off the printer, press and hold the "Go" button, and turn the printer back on while continuing to hold the "Go" button. Release the button when the printer's attention light turns on and all other lights turn off.
5. If the issue still persists after resetting the printer, it may be necessary to replace the printer's formatter board, which contains the printer's internal memory and storage.

As for the slow response when using the printer's keys, this may be caused by a separate issue. Here are some steps you can take to troubleshoot this issue:

1. Check the printer's display for any error messages or other indications of a problem.
2. Make sure that the printer's firmware is up to date. You can download the latest firmware from HP's website and install it using the printer's embedded web server or HP Web Jetadmin software.
3. If the printer is connected to a network, try connecting it directly to a computer using a USB cable to see if the issue persists. If it does not, there may be a problem with the network connection.
4. Try resetting the printer to its factory defaults, as described in the previous section. This may help to clear any configuration or settings issues that are causing the slow response.

try following directions here... https://support.hp.com/my-en/document/c05126409

1. Turn off the printer and unplug it from the power source.
2. Wait for a few minutes, then plug the printer back in and turn it on.
3. Check if the error has been cleared.

If the error persists, you may need to perform a firmware update. You can do this by downloading the latest firmware from the HP website and following the instructions provided to install it on your printer. If you continue to have issues with error #c3-1312, it is recommended to contact HP Support for further assistance

It seems like you've tried several troubleshooting steps to resolve the issue, but the problem persists. A common cause of black pages with a laser printer is a faulty toner cartridge, but since you've tried replacing it, it's unlikely that's the issue. Another possibility is a problem with the imaging drum or the transfer roller, both of which can cause black pages. You may also want to check the toner supply system, including the toner level sensor, for any clogs or blockages that may be causing the problem. If these steps don't resolve the issue, it may be necessary to seek further assistance from a professional repair service

Error 50.00 in HP Laserjet M5035MFP usually indicates a problem with the fuser unit. To resolve the issue, try these steps:

1. Turn off the printer and unplug it from the power source.
2. Wait for a minute, then plug it back in and turn it on.
3. If the error persists, check the fuser unit for any visible damage or obstructions.
4. If the fuser unit is damaged, it needs to be replaced.

If the issue persists after trying these steps, consider contacting HP support for further assistance.

Hi, try replacing the laser unit

Turn the printer on, and replace the cartridges if possible. If the carriage moves, but there is still a grinding noise, there may be a paper feed issue. If the carriage will not move, then it is a carriage stall issue.

The Printer Makes a Grinding Noise When It is Turned On or ...

https://www.google.com/search?q=HP+DeskJet+Ink+Advantage+1515%2C+printer+keep+making+a+grinding+noise

When your HP printer is not working properly on your device, you can check the status of your HP printer cartridge and replace it. Check this article - https://www.printeralign.com/fix-hp-printer-wont-print

The "Scanner error 2" message on an HP LaserJet 3052 printer typically indicates a problem with the scanner assembly. To resolve this issue, you should turn off the printer, unplug it from the power source, and wait for a few minutes. Then plug the printer back in and turn it on again. This will often clear the error and restore normal operation of the scanner. If the error persists, you may need to contact HP technical support for further assistance.

If your HP Color LaserJet 4700 is printing with shadows, it could be caused by a few different issues. Here are a few potential causes:

1. Toner Cartridges: The toner cartridges may be low or empty, causing the shadows to appear. It is recommended to check the toner levels and replace the cartridges if necessary.
2. Toner Smears: The toner smears on the drum or the fuser can cause shadows to appear on the printouts. Clean the drum and fuser with a lint-free cloth and check if the problem persists.
3. Fuser Unit: The fuser unit could be malfunctioning and may need to be replaced.
4. Paper Quality: Using low-quality or damp paper can cause shadows to appear on the printouts. Use high-quality, dry paper for better results.
5. Printer settings: Some printer settings can also cause shadows to appear, such as toner density or print resolution. Ensure that the settings are set to the recommended level.
6. Dust or debris: Dust or debris inside the printer can cause shadows, Clean the inside of the printer and check if the problem persists.

It is important to diagnose the specific cause of the problem before attempting to fix it. If you are not comfortable with troubleshooting the problem, it is best to contact HP support or a qualified technician for assistance.

some cartridges [aftermarket] are not recognized or compatible with unit --installed wrong--danage or dirty donnection --damage or failed circuit

The error message "50.2F.00" typically refers to a problem with the fuser assembly in an HP LaserJet 500 color M551 series printer. The fuser assembly is responsible for fusing toner to the paper, and this error can occur if the fuser is not functioning properly. There are a few potential causes for this error message:

• The fuser may not be properly installed in the printer, in which case you should check to make sure that it is securely seated and connected.
• The fuser may be defective, which is most likely the case if the error message appears shortly after installing a new fuser. In this case, you may need to replace the fuser with a new one.
• There may be a problem with the printer's power supply, which is causing the fuser to malfunction. You should check the connections and ensure that the power supply is working properly.

It is also good idea to check for any firmware updates for your printer. Sometimes these updates can fix known issues. The best thing to do is check the printer's manual for troubleshooting or HP Support for specific instructions for your printer. Also you can try to call the manufacturer support.

Hi, please ensure that your printer is not overheating from extensive operating first. If so, please it off for 30 minutes before using the printer again. If you have any external usb drives attached to the printer, please remove them, restart the printer via the power button and check the display again. If all else fails, you might need to factory reset your printer to be able to overcome this issue. Thank you.

There could be several reasons why the copier is producing blank pages. Here are a few possible causes:

1. The ink or toner cartridges are empty or low. Make sure you have new cartridges installed, or try replacing the old ones to see if that fixes the issue.
2. The scanner bed or the glass surface is dirty. Clean the scanner bed and glass surface with a soft, lint-free cloth to remove any dust or debris.
3. The paper tray is empty or has malfunctioning paper. Make sure there is paper in the tray and that it is not wrinkled or damaged.
4. The printer drivers are out of date or corrupt. Try updating the drivers to see if that fixes the issue.

If none of these solutions fix the problem, there may be a more serious issue with the printer that will require professional repair. In that case, you can try contacting HP customer support for further assistance.

Hi, please ensure that all of the cartridges are created by HP and not a 3rd party developer. If not, the HP firmware would stop that one cartridge from printing. Also, you can ensure that the color that's not printing isn't empty. Otherwise, you can check that each color cartridge is properly installed and then restart the printer before moving forward. Thank you.

There are a few possible reasons why your HP Photosmart printer may not be printing pictures, particularly if it is able to print an 8x10 size but not a 4x6 size. Here are a few things you can try to troubleshoot the problem:

1. Check the printer settings: Make sure the printer is set to the correct paper size and print quality settings for the type of pictures you are trying to print. If the settings are not appropriate for the size or quality of the pictures, it can affect the print quality and cause the printer to display an error message.
2. Check the paper tray: Make sure the paper tray is correctly aligned and has enough paper to accommodate the size of the pictures you are trying to print. If the paper tray is not properly aligned or is empty, it can cause the printer to malfunction.
3. Check the ink cartridges: Make sure the ink cartridges are properly installed and that there is enough ink. If the cartridges are low on ink or not properly installed, it can cause the printer to display an error message or produce poor print quality.
4. Check for any visible issues: Inspect the printer and its components for any visible issues that may be causing the problem. This can include debris or foreign objects that may have gotten stuck in the printer, or damage to the printer or its components.

If you have tried these troubleshooting steps and the problem persists, it is recommended to have the printer serviced by a professional. A technician will be able to diagnose the problem and determine the necessary repairs. I hope this information is helpful. If you have any further questions or need additional assistance, please don't hesitate to ask.

If your HP Designjet 500 is not detecting the new printhead, there could be a few different issues causing the problem. Here are a few things you can try to troubleshoot the issue:

1. Check the printhead connection: Make sure the printhead is properly connected to the printer. If the printhead is not securely installed, it may not be detected by the printer.
2. Check the printhead compatibility: Make sure the new printhead is compatible with your HP Designjet 500 printer. Using a printhead that is not compatible with your printer can cause issues with the printhead being detected.
3. Check the printer firmware: Make sure the printer's firmware is up to date. If the firmware is out of date, it may not be able to recognize the new printhead. You can check for updates by going to the HP Support website and downloading the latest firmware for your printer.
4. Check for any visible issues: Inspect the printhead and the printer for any visible issues that may be preventing the printhead from being detected. This can include debris or foreign objects that may have gotten stuck in the printhead or printer, or damage to the printhead or printer.

If you have tried these troubleshooting steps and the problem persists, it may be necessary to have the printer serviced by a professional. A technician will be able to diagnose the problem and determine the necessary repairs.

You can follow the given instructions

Your printer should have been packaged with a USB cable regardless of whether it is a wireless or wired printer. Plug the cable into your printer and your computer's USB port. The direct linking should trigger your computer to recognize the printer and start up the software needed to complete the installation.